RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
RadioLabs
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
Bullet-Backfire WiFi Antenna

Bullet-Backfire Kit- Client
This is the perfect set-up if you are close to a public WiFi hotspot. With the Bullet and the 15dB directional antenna aimed at the public Wifi hotspot, the O2Wind will then rebroadcast the signal inside a secondary location.

Antenna Details

 


Bullet-Backfire Kit with 25 ft Ethernet Cable

RadioLabs Low Price:
$279.95

In Stock


Bullet-Backfire Kit with 50 ft Ethernet Cable

RadioLabs Low Price:
$289.95

In Stock


Bullet-Backfire Combo with 25 ft Ethernet Cable (router not included)

RadioLabs Low Price:
$189.95

In Stock


View Your Shopping Cart

Bullet - Backfire Kit Includes:

  • Bullet 802.11 b/g/n Wireless Device
  • 15dBi High Gain Backfire Antenna
  • O2Wind High Power Router
  • 12v POE Injectors for Bullet
  • 25' or 50' RJ-45 Ethernet cable
  • Free Coax Seal
  • Antenna Mounting Hardware

Set Up Instructions:

Bullet-Backfire O2Wind Instructions

Bullet-Backfire Kit- Client

- The Bullet paired with an 15dB directional antenna as a Wireless Client- With the Bullet attached to the 15dB antenna you can now connect to an already existing broadcasting LAN network and rebroadcast at a different location.

Setup and integration into an existing system or home network is as simple as can be. Simply attach the Bullet to the 2.4Ghz 15dBI antenna with the integrated N-Male connector, connect the included POE injector with any standard CAT-5 Ethernet cable and the Bullet is ready to connect to O2Wind (wireless router). With a little configuration, your Bullet-Backfire Kit will now be able to rebroadcast a wireless signal for you to use at a secondary location.

The Bullet - High Speed Wireless Platform provides more than 600mW (+ 28dBm) of output power (over 10 times the power of a standard off the shelf wireless router or bridge). This high power output, when combined with a high gain antenna, allows for much longer range and greater connectivity.

The Bullet has an extremely high power output. User is responsible to ensure that product meets their Federal, State and local government guidelines.

 

 

Back to WiFi Home

 

 
 
Accessories
 
High Power Access Point 600

Wireless Access Point | Bridge | Repeater - One of the best access points available. If you are looking for the best possible Wireless Access Point, the RadioLabs RL 3022 Deluxe AP is one of the most powerful and configurable wireless access points available. It can be configured as an AP, Bridge or Wireless Repeater.   More...

........
 
WaveRV Marine - Wireless Marine Antenna

With our powerful internal wireless card combined with an 8dB omni antenna the WaveRV Marine gives an amazing performance boost over integrated wireless and stock cards. Typical results give up to 30 times the range of notebooks with integrated wireless.   More...   FAQ

........
 
1 Watt High Power Router - O2Breeze

With our already extensive line-up of high power routers, the O2Breeze is no exception to the rule when it comes to performance and reliability. With 802.11 b/g/n speed capability of up to 150 mbps, its exactly that, a breeze.   More...

........
 
Wave Magnum - 1 Watt High Power USB WiFi

With a whopping 1,000mw output power!! RadioLabs rock-solid performer, the Wave Magnum is the highest power output USB adapter ever released. The Wave Magnum is capable of 802.11B, G and Super G speed allowing up to 108mBps throughput and up to 1 Mile range.   More...

........
Bullet
Device Specifications
IEEE Communication Protocols 802.11B / 802.11G / 802.11N / 802.3
Frequency Band 2.4 ~ 2.5 GHz
System Information Processor Specs: Atheros MIPS 4KC, 180MHz
Memory Information: 16MB SDRAM, 4MB Flash
Regulatory/Compliance Information

Wireless Approvals: FCC Part 15.247, IC RS210

RoHS Compliance Yes
2.4Ghz Receiver Specifications
Receive Sensitivity (Typical)

802.11B/G:
-83dBm (+/-2dB) @ 24Mbps
-80dBm (+/-2dB) @ 36Mbps
-77dBm (+/-2dB) @ 48Mbps
-75dBm (+/-2dB) @ 54Mbps

802.11N:
-96dBm (+/-2dB) @ MCS0
-95dBm (+/-2dB) @ MCS1
-92dBm (+/-2dB) @ MCS2
-90dBm (+/-2dB) @ MCS3
-86dBm (+/-2dB) @ MCS4
-83dBm (+/-2dB) @ MCS5
-77dBm (+/-2dB) @ MCS6
-74dBm (+/-2dB) @ MCS7

Transmitter Specifications
Avg TX Power 22dBm - 28dBm (-/+ 2dBm)
TX Linear output Power 600 mW / +28 dBm
Channels 11 for North America, 14 for Japan, 13 for Europe, 2 for Spain, 4 for France
TX/RX Switch Time < 1µsec
Channel Width Up to 40Mhz
User Interface
Diagnostic LED

Power: ON/OFF - Transmit/Receive -
Signal Strength Indicator

Configuration Interface
Configuration via web browser - no software required. Firmware : AirOs V5
Power Requirements
DC Supply Voltage

15V .8A via included POE injector.

Max Power Consumption 7 Watts
Security
Wireless Security and available network security features IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS)-AP mode
WPA - Wi-Fi Protected Access
PSK (Pre shared key) with 64/128-bit WEP Key
EAP-MD5/TLS/TTLS authenticator (AP Mode)
TKIP
MAC address filtering (WLAN)
Hide SSID in beacons
Layer 2 Isolation
Mechanical Specifications
Data Connector Type RJ-45 10/100 Category 5
RF Connector Type Integrated N-type Male Jack (connects directly to antenna)
Enclosure Characteristics Outdoor UV Stabilized Plastic
Enclosure Size 15.2cm. length x 3.1 cm. height x 3.7cm. width
Weight 0.18kg (enclosure only)
Operating Temperature -40C to +80C
Operating Humidity 5 to 95% Condensing
BackFire High Gain WiFi Antenna
Frequency Range
2400 - 2500 MHz
VSWR
<1.5 @ 100MHz bandwidth
Impedance
50 Ω
Gain
15 dBi
Polarization
Vertical
Half power beamwidth
E-Plane beamwidth = 32°
H-Plane beamwidth = 32°
Front to Back Ratio
>27dB
Max. Power input
50 Watts
Ground
Direct Ground (not required but advised)
Connector type
N-Female
Dimensions
9.75" diameter x 4 1/3" depth
Weight
2 pounds

Wind load area

Front-
.299 feet square or (.028m2)
Maximum wind velocity
 130 MPH (210 km/h)
Supporting pole
¤30 ~ ¤60mm
Dome Material
UV-Resistant ABS
Item # BBF-KIT-25
Price: $279.95
Item # BBF-KIT-50
Price: $289.95
 
 
Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
 
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
 
RadioLabs and RadioLabs.com are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -