♠WiFi | Wireless 1-Watt Amplifier

Indoor WiFi Amplifier

Commercial Grade Indoor Wireless Amplifier
Extend the range of your wireless network with the Commercial Grade Wireless Indoor Amplifier. This is one of the easiest amplifiers to install and use and only requires 2 cables to connect to your wireless device.

Features

Bi-directional amplifier for IEEE 802.11B/G and Super G Dual Band compatible.
1000mw (+30dBm) gain increase
One-Piece Aluminum Construction
Automatic gain control to minimize the signal distortion
Heavy-Duty Casing
Low noise amplifier with system noise figure 3.5 dB
Universal 110/220 AC auto switching AC
Easy to install
Industrial standard N-Female type connector
Made in USA

1-Watt Indoor Wireless Amplifier

This One-Watt (1000mw) Wireless Indoor Amplfier delivers high power output in a small easy-to-use package. This amplfier will boost the receive and transmit (RX and TX) power of your wireless device a whopping 30 dBm.

The LUX241W is designed with the power injector and the amplifier unit built into a single housing, so there is no need for the extra cabling required with most other 1 watt amplfiers. You only need 2 cables to utilize the amplifier, one cable to connect the wireless device you are amplifying to the input side of the amplfier and one cable to connect the output side of the amp to your antenna. Then just plug in the power supply and you're broadcasting!

The LUX241W is compatible with any wireless device that produces 100 milliwatts (+20dBm) or less of RF power and has an external antenna jack. This applies to most consumer-grade wireless routers and wireless NICs (Network Interface Cards)

This wireless amplifier is FCC compliant with low gain 802.11 antennas, licensed ham radio operators, military, and export applications. Please check local regulations prior to ordering.

Also, because the LUX241W Wireless Indoor Amplifier combines a power injector and an amplifier, itis not rated for outdoor use, please take this into consideration when ordering, if you need an outdoor-rated amplifier, please refer to our amplifier page here

NOTE: The LUX24IND, like most wireless amplifiers, can only accept an input level of 100mw (or +20dBM) without damage to the amplifier's internal circuitry. Please contact us before purchasing if you have any questions regarding this.

Back to WiFi Home

View all the WiFi Amplifiers

Note: Coaxial cables are not included. For cable information, please go here



RadioLabs High Power Access Point

o2Point - High Power Access Point - The New RadioLabs O2Point gives the user 8 times the power of an ordinary wireless access point. With Turbo G mode and FlexO2™ technology, O2Point is a complete Wireless toolbox in a small package! More...

Professional Grade 15dB Omni WiFi Antenna

This high gain vertical 2.4 GHz antenna can act as the central point to your WiFi, WLAN or 802.11 application. The Radiolabs 2.4 Omni antenna has an incredible 15 dB of gain. This is a professional grade antenna that we typically sell to Wireless ISPs and installers, but it can certainly be used to boost up the wireless network in your home or office. More...

Wave Magnum - High Power USB WiFi

A Whopping 500mW!! RadioLabs newest release, the Wave Magnum is the highest power output USB adapter ever released. The Wave Magnum is capable of 802.11B, G and Super G speed. 1+ Mile guaranteed... more.. More...

Wireless Pigtail cables

If you don't need a long extension cable or have a wireless device with an MC or MMCX connector, we have inexpensive pigtails that will allow connectivity with our WiFi antennas More...

20 ft WiFi Antenna Cable

RadioLabs offers a full line of pre-made cables for your 802.11 installation. We have pre-made cables or you can have us custom make a cable for your specific application. More...

Model # IND1WATT24

1-Watt Indoor Wireless Amplifier

Operating Conditions

Operating
Temperature Range

Normal: -10°C ~ +50°C
Extreme: -30°C ~ +70°C

Operating
Humidity

5% to 100% RH

Storage Temperature

-40°C ~ +90°C

Supply Voltage

AC 100V~240V
50/60Hz DC 12V/1A

Electrical Conditions

Access Method

DS/TDD

Operating Frequency

2.4GHz ~ 2.5GHz

Spurious Emission

30MHz ~ 1 GHz : -36dBm(max.)
1GHz ~ 12.75 GHz : - 30dBm(max.)

Transmitter Specifications

Tx output power variation

25°C: 30dBm ±1dB(Pin=13dBm)
-30°C: 30dBm ±2dB(Pin=13dBm)
70°C: 30dBm ±2dB(Pin=13dBm)

Tx output power vs. Input
Power

30dBm ±1dB(Pin=7~20dBm)
30dBm ±2dB(Pin=7~20dBm)
30dBm ±2dB(Pin=7~20dBm)

Tx ACPR ±11MHz

-30°C ~ +70°C: 30dBc (max.)

TX on/off control time

30°C ~ +70°C: 5us (max.)

Receiver Specifications

Rx Gain

-30°C ~ +70°C: 10dB(min.)

Rx Gain Flatness

25°C: ±1dB
-30°C: ±2dB
70°C: ±2dB

Rx Noise Figure

-30°C ~ +70°C: 3.5dBm (max.)

Rx Third Intercept Point

-30°C ~ +70°C: 30dBm (max.)

Rx Return Loss

-30°C ~ +70°C: 14dB(min.)

Rx on/off control timing

-30°C ~ +70°C: 2us (max.)

Current Consumption

Tx Current

1000mA (max.): -30°C ~ +70°C

Rx Current

130mA (max.): -30°C ~ +70°C

Package Contents

1. 1-W Booster Amplifier
2. AC Power Adapter

Item # LUX24IND
Price: $219.95

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

More Information

RadioLabs and RadioLabs.com are copyright. The contents of these webpages are © RadioLabs International Inc., 2003-2004. All rights reserved. If you experience any problems with our site, please contact our webmaster

Commercial Grade Indoor Wireless Amplifier Extend the range of your wireless network with the Commercial Grade Wireless Indoor Amplifier. This is one of the easiest amplifiers to install and use and only requires 2 cables to connect to your wireless device.

Commercial Grade Indoor Wireless Amplifier
Extend the range of your wireless network with the Commercial Grade Wireless Indoor Amplifier. This is one of the easiest amplifiers to install and use and only requires 2 cables to connect to your wireless device.