RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
Long Range Access Point

1 Watt Wireless Access Point
The BAP241W is the highest power output wireless access point available. If you need coverage and lots of it, this 1 watt output access point is the unit for you

Antenna Details
Highest Legal Output Router
1 Watt Access Point
This item is not currently available.
View Your Shopping Cart
1 Watt Access Point
  • 1 Watt (29dBm)Power Output
  • Easily and Quickly Connect your Ethernet Devices or high speed connection to Wireless B/G mode
  • Make wireless AP and Bridge mode simultaneously with WDS (repeater)
  • Plug & Play (no driver required, but comes with CD rom manual)
  • 1-Mile Line of sight between 2 APs in bridge mode.
  • 4 LAN and 1 WAN Port for multiple connections
  • Dual antenna external jacks


(Rear View Below)

1 Watt Access Point

One Watt (1000mw) Access Point - Bridge

Up to 20 times the Power!

Need better WIFI coverage for your industrial, commercial or residential application? RadioLabs is now proud to offer the BAP241W 1 Watt Wireless Access Point.

Manufactured in the USA by Bountiful Wifi, the BAP241W High Quality, High Performance Access Point/Bridge/Repeater is the most powerful stand-alone unit on the market. You cannot get a more powerful wireless device without an FCC license.   It comes with all the latest features for 802.11x protocols(see feature list) This device is an excellent choice for those who need maximum coverage and performance. 

The BAP241W can cover up to a quarter mile radius by itself (see features), and can cover even a greater range using Radiolabs external antennas.  Added functionality allows the BAP241W to act as an Wireless Access Point, WDS Bridge Unit*, Gateway, and Repeater Unit.  Featuring the latest in security protocol, the BAP241W supports WEP, WPA, WPA(PSK) and WPA 2 with TKIP and AES encryption, the 1 Watt Wireless Access Point will keep your wireless broadcast safe.

The BAP241W comes with 2 external antenna jacks (RP-SMA type connector) for the ability to augment your wireless broadcast through external high-gain antennas. Please view our wireless antennas page for a list of our external antenna options.

The BAP241W has a extremely high power output. Under no circumstances should any amplifier be used with these units.

Back to WiFi Home

View all the Wireless Network Devices

2.4 GHz 11.8 db Omni-Directional WiFi Antenna

This high gain vertical 2.4 GHz antenna can act as the central point to your WiFi, WLAN or 802.11 application. The Radiolabs 2.4 Omni antenna has a whopping 12dB gain. Ideally, you would want this antenna as the central point of your system and and use a directional antenna on the client side for maximum throughput.   More...

High Gain Backfire Wireless Antenna

The Backfire WiFi Antenna has very good gain for such a small antenna. Performance on 2.4 GHz is excellent!! The 15 dB Backfire is the antenna we recommend for extended wireless coverage or building to building links.   More...

Professional Grade 15dB Omni WiFi Antenna

This high gain vertical 2.4 GHz antenna can act as the central point to your WiFi, WLAN or 802.11 application. The Radiolabs 2.4 Omni antenna has an incredible 15 dB of gain. This is a professional grade antenna that we typically sell to Wireless ISPs and installers, but it can certainly be used to boost up the wireless network in your home or office.   More...

2.4GHz 19dBi Flat Panel Antenna

The RadioLabs 19 dBI Flat Panel WiFi Antenna is a popular antenna for our WISP customers. This antenna will allow you to easily set up a stable link between your access points and a distant wireless router.   More...

WiFi Antenna Large Mount

We have a variety of antenna mounts that allow you to easily mount your WiFi antennas indoors or outdoors. The attractive design and 90 adjustable tilt makes them very useful in many applications.   More...

NLOS-Point to point bridge - 2.4 GHz

Non-Line-of-Sight -This kit will have much better penetration through trees and small obstructions because the Flat Panel Antennas are made with Circular Polarization. RadioLabs has recognized the need for a point to point system that will perform better in situations where complete line of sight is not possible.   More...

20 ft WiFi Antenna Cable

RadioLabs offers a full line of pre-made cables for your 802.11 installation. We have pre-made cables or you can have us custom make a cable for your specific application.   More...

Wave Magnum - 1 Watt High Power USB WiFi

With a whopping 1,000mw output power!! RadioLabs rock-solid performer, the Wave Magnum is the highest power output USB adapter ever released. The Wave Magnum is capable of 802.11B, G and Super G speed allowing up to 108mBps throughput and up to 1 Mile range.   More...

Model # BAP241W
1 Watt Wireless Access Point
Wireless LAN (for Access Point and Repeater)
Data Rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
Standards IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u
Compatibility IEEE 802.11g/ IEEE 802.11b compliant
Power Requirements Power Supply: 90 to 240 VDC ± 10% (depends on different
countries) Device: 12 V/ 1A
Status LEDs

LAN1, LAN2, LAN3, LAN4: Status WLAN and WAN: Link, System Status and Power: on/off

Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
RF Information
Frequency Band 2.400~2.484 GHz
Media Access Protocol Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology
  • Orthogonal Frequency Division
  • Multiplexing (OFDM)
  • DBPSK @ 1Mbps
  • DQPSK @2Mbps
  • CCK @ 5.5 & 11Mbps
  • BPSK @ 6 and 9 Mbps
  • QPSK @ 12 and 18 Mbps
  • 16-QAM @ 24 and 36 Mbps
  • 64-QAM @ 48 and 54 Mbps
Operating Channels 11 for North America, 14 for Japan, 13 for Europe, 2 for Spain, 4 for France
Receive Sensitivity (Typical)

802.11b -95dBm @ 1Mbps -90dBm@ 11Mbps

802.11g -92dBm @ 6Mbps -73 @ 54Mbps

Available transmit power (Depend on Different Countries’ Regulation) 29 ± 1dBm @1 through 11Mbps
27 ± 1dBm @6 through 54Mbps
RF Connector SMA Type (Female Reverse)
Networking Information
Topology Ad-Hoc, Infrastructure
Operation Mode Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/Repeater
Interface One 10/100Mbps RJ-45 LAN Port

• IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS) Support—
AP Mode
• WPA -- Wi-Fi Protected Access
• PSK (Pre share key) with 64/ 128-bit WEP Key
• EAP-MD5/TLS/ TTLS authenticator (AP Mode) support
• MAC address filtering (WLAN)
• Hide SSID in beacons
• Layer 2 Isolation

IP Auto-configuration DHCP client/ server
Configuration Web-based configuration (HTTP)
Firmware Upgrade Upgrade firmware via Web-browser
Dimensions (HxWxD) 25(L)mm 108(W)mm 31(H)mm
4.9 (L)in 4.3(W)in 1.2(H)in
Weight 350 g (0.8 lb.)
Interface IEEE802.3 (10Base-T/100 Base-TX)
Transmission Rate 10/100Mbps (auto sense)
LAN Ports / Connector Four (4) 10/100 Base-T RJ-45 ports (Auto MDI/X)
WAN Port / Connector One (1) 10/100 Base-T RJ-45 ports (Auto MDI/X)
Transmission Encoding Method 10Base-T Manchester coding:
100Base-TX 4B5B/MLT-3
Access Method CSMA/CD
Power Supply 100-120V AC 50/60Hz DC 3.3v, 2.5A
Dimensions W2.3xH4.8xD3.5 in. (58x120x89mm)
Weight 1.8 lbs.
Operating Environment 0-35º C, 25-80% humidity (non-condensing)
Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
RadioLabs and are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -