High Speed 802.11N Bridge System
- The Bullet - High Speed Wireless Platform is a new way to bridge long range wireless connections. With 802.11N compatibility and an integrated N-Male antenna connector, the Bullet can transform any 2.4Ghz antenna into a bridge, access point or wireless client with speeds available up to 100Mbps!
Fully weather-proof and powered via POE (power-over-ethernet), the Bullet provides direct connection to any 2.4Ghz antenna with no coaxial cable needed. No coaxial cabling means no signal loss, which means direct injection of power into your antenna and this translates into better speeds, longer range and better stability.
The Bullet - Inline Access Point/Bridge is standardized with the IEEE 802.11N wireless protocol. This newly ratified standard allows the Bullet to provide wireless speeds up to and above 100Mbps (actual throughput)! These speeds are attainable by taking advantage of the MIMO (Multi-In Multi-Out) Technology that 802.11N provides, increasing wireless transfer speeds over 4 times the speed! of 802.11G wireless networking equipment.
The Bullet - High Speed Wireless Platform provides more than 600mW (+ 28dBm) of output power (over 10 times the power of a standard off the shelf wireless router or bridge). This high power output, when combined with a high gain antenna, allows for much longer range and better connectivity.
Setup and integration into your existing system or home network is as simple as can be. Simply attach the Bullet to any 2.4Ghz antenna (such as our Professional Grade 15dB Omni-Directional Antenna) with the integrated N-Male connector, connect the included POE injector with any standard CAT-5 Ethernet cable (not included) and the Bullet is ready to connect to your existing LAN network, wireless router or directly to your computer's ethernet port.
With power provided by POE (power-over-ethernet), you don't even need to run a power cable to the Bullet, just use the included power injector and your bridge has power and data transmitted via CAT-5 cabling! All configuration is via web-based interface, no software required. Powered by the AirOS firmware system, setup is a breeze and all settings are saved in the Bullet's internal memory.
The Bullet has the ability to function
as a high speed bridge, stand alone access point, a wireless client or even configuration as a wireless repeater
system for instant connection to any other wireless system (this setup requires an additional wireless access point, such as the RadioLabs O2Point Access Point).
(1) Bullet Wireless Unit
(1) Power-Over-Ethernet Power Injector
(1) Power Cable
The Bullet Wireless Bridge Diagram
The Bullet Access Point / Client Diagram
to WiFi Home
View all the Wireless Systems