RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
1 Watt High Power Router

802.11 b/g/n Wireless Router - O2Wind
The O2Wind is the newest product in our O2 line of high power 802.11 WiFi devices. At 1 Watt (1000 milliwatts!) this unit is the highest output router legally available. If you need a high power router for lots of coverage, this is the unit for you.
w/ NEW POE OUTPUT Capability!!

Antenna Details

O2Wind 802.11N Wireless Router

Click Here to Test Drive our Firmware

RadioLabs Low Price:

In Stock
View Your Shopping Cart
1 Watt Router
  • 1 Watt (30dBm) Power Output
  • QoS enhancement-WMM
  • TCP/UDP/ICMP/ARP protocol stack
  • Virtual DMZ, Port forwarding
  • High power and High sensitivity
  • 4 LAN and 1 WAN Port for multiple connections
  • RF output power adjustable
  • Firewall, URL/IP/Port/MAC filtering
  • Support Gateway, Bridge and WISP mode
  • Multiple ESSID

RP-SMA Connector
RP-SMA Connectors for quick external antenna installation!

The O2Wind supports RadioLabs WDS, also known as Wireless Distribution System or the Bridge/Repeater Mode, for point-to-point or point-to-multipoint communication and covers dead spots in Wireless LAN's. WDS allows the O2Wind to wirelessly communicate with other RadioLabs O2Wind Access Points and Routers with WDS protocol. For more information on this unique feature, please read the Advanced User manual.

802.11 b/g/n Wireless Router

RadioLabs now has a full 1 Watt (1000mW) 802.11 N speed router. With the multiple ESSID capabilty and QoS enhancement, our customers have asked for it and RadioLabs is glad to rise to the occasion and answer the call.

The O2Wind is a great addition to any industrial, commercial or residential setting.  With a high-speed data-rate of up to 300Mbps, this is the best networking router on the market.

IMPORTANT Upate: NEW 24 Volt Standard POE output! Not just POE Input, yes, Output! The O2Wind, is one of the only High Power, 1-Watt routers on the market, with Standard 24v, POE Output built in. Yes, you can power the router via 12v, and run an external radio off of the POE port up to 330 Feet away via CAT-5. This is an important new feature. The O2Wind, allows POE input as well, so you can run this mobile off of traditional 12volts into the DC input port, then, run an o2Surf, or Bullet off of the built-in POE port. This is a HUGE move on our part to allow you to either capture a signal from a distant location and repeat it right there in your home, RV or anywhere you have voltage, and then control our o2Surf remote, as either an Access Point, or in Client Bridge mode.

Click here to Test Drive a sample of our basic O2 series Router firmeware (note, this does not show the advanced Wan Routing function, or the Multiple SSID mode of the O2Breeze router)

With up to 20 times the output power of a standard off-the-shelf WiFi router, the O2Wind provides a massive gain in range and signal stability over the competition. The O2Wind 1 Watt Wireless Router is the most powerful stand-alone wireless router on the market. You cannot get a more powerful wireless device without an FCC license.

Added functionality allows the O2Wind to act as a Wireless Access Point, WDS Bridge Unit*, Gateway, Ethernet Client and a Universal Repeater. Featuring the latest in security protocol, the O2Wind supports WEP, WPA, WPA(PSK) and WPA2/WPA2 Mixed with TKIP and AES encryption to keep your wireless network safe and secure.

The O2Wind comes with 2 external antennas (RP-SMA type connectors) complying with  2.4GHz IEEE 802.11N 2x2 MIMO. This device is an excellent choice for those who need maximum coverage and performance out of their 802.11N wireless equipment.

With 1000 milliwatts of transmit power, the O2Wind can cover up to half a mile radius (see features).

The O2Wind has a extremely high power output. Under no circumstances should any signal amplifier be used to augment the power output of the O2Wind.


Back to WiFi Home

View all the Wireless Network Devices

900Mhz Non-Line-Of-Sight Wireless Bridge System

All Inclusive Wireless Bridging System utilizing the 900MHz frequency for non line of sight links up to 18 miles. Capable of link speeds up to 150 megabits/second through limited range dense foliage, heavy urban environments or any other line of sight obstructions that cause propogation issues with higher frequency 802.11A/B/G/N systems   More...

20 ft WiFi Antenna Cable

RadioLabs offers a full line of pre-made cables for your 802.11 installation. We have pre-made cables or you can have us custom make a cable for your specific application.   More...

Vertical Omni-Directional 8 db WiFi Antenna

This high gain wireless LAN antenna is the perfect blend of performance and compact size. You can easily mount it provide a tremendous boost to the wireless range of your 802.11 router, hot spot, or access point.   More...

CaptiFi - High Power USB Wifi Antenna

The Gen III CaptiFi Long Range Wifi Antenna is an ultra-reliable, self-contained all-in-one High Power, 802.11 B/G/N USB Wifi Antenna that requires no additional equipment to utiilize. With a purpose-built 9 dB omni-directional antenna and an enclosed max-legal power EIRP rated 802.11B/G/N wireless adapter, the CaptiFi provides long range wireless connectivity up to 15x farther than an integrated wireless card   More...   FAQ

High Gain Backfire Wireless Antenna

The Backfire WiFi Antenna has very good gain for such a small antenna. Performance on 2.4 GHz is excellent!! The 15 dB Backfire is the antenna we recommend for extended wireless coverage or building to building links.   More...

Bullet Compact 802.11N Wireless Bridging System

High Speed 802.11N Compact Bridge System - Networking bandwidth requirements are ever increasing, and that 802.11G speeds sometimes don't cut it. With this combination kit of high power equipment, you can easily obtain wireless speeds of up to 150Mbps for point to point bridging up to and exceeding 5 miles.   More...

Bullet - High Speed Wireless Platform

The Bullet is an 802.11N multi-function wireless platform capable of wireless speeds up to 100Mbps! With an integrated N-Male connector, the Bullet can connect directly to any 2.4Ghz antenna to provide high speed bridging, client access or 802.11 wireless coverage.   More...   FAQ

Model # O2Wind
1 Watt Wireless Router
Wireless LAN (for Access Point and Repeater)
Data Rates
  • 802.11b: 11, 5.5, 2, 1Mbps
  • 802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
  • 802.11n(20MHz): up to 144Mbps
  • 802.11n(40MHz): up to 300Mbps
Standards IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u
Compatibility IEEE 802.11g/ IEEE 802.11b compliant
Power Requirements Power Supply: 90 to 240 VDC ± 10% (depends on different
countries) Device: 12 V/ 1.A
Status LEDs

LAN1, LAN2, LAN3, LAN4: Status WLAN and WAN: Link, System Status and Power: on/off,WPS

Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
RF Information
Frequency Band 2.400~2.483 GHz
Media Access Protocol Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology
  • Orthogonal Frequency Division
  • Multiplexing (OFDM)
  • DBPSK @ 1Mbps
  • DQPSK @2Mbps
  • CCK @ 5.5 & 11Mbps
  • BPSK @ 6 and 9 Mbps
  • QPSK @ 12 and 18 Mbps
  • 16-QAM @ 24 and 36 Mbps
  • 64-QAM @ 48 and 54 Mbps
Operating Channels 11 for North America, 14 for Japan, 13 for Europe, 2 for Spain, 4 for France
Receive Sensitivity (Typical)
  • 96dBm @ 802.11b
  • 91dBm @ 802.11g
  • 91dBm @ 802.11n
Available transmit power (Depend on Different Countries’ Regulation)
  • 802.11b: up to 28 ± 1 dBm
  • 802.11g: up to 26 ± 1 dBm
  • 802.11n: up to 26 ± 1 dBm
RF Connector SMA Type (Female Reverse)
Networking Information
Topology Ad-Hoc, Infrastructure
Operation Mode AP, Client, WDS, AP+WDS
Interface One 10/100Mbps RJ-45 LAN Port

• IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS) Support—
AP Mode
• WPA/WPA2/WPA2 Mixed -- Wi-Fi Protected Access
• PSK (Pre share key) with 64/ 128-bit WEP Key
• EAP-MD5/TLS/ TTLS authenticator (AP Mode) support
• MAC address filtering (WLAN)
• Hide SSID in beacons
• Layer 2 Isolation

IP Auto-configuration DHCP client/ server
Configuration Web-based configuration (HTTP)
Firmware Upgrade Upgrade firmware via Web-browser
Dimensions (HxWxD) 25(L)mm 108(W)mm 31(H)mm
4.9 (L)in 4.3(W)in 1.2(H)in
Weight 350 g (0.8 lb.)
Interface IEEE802.3 (10Base-T/100 Base-TX)
Transmission Rate 10/100Mbps (auto sense)
LAN Ports / Connector Four (4) 10/100 Base-T RJ-45 ports (Auto MDI/X)
WAN Port / Connector One (1) 10/100 Base-T RJ-45 ports (Auto MDI/X)
Transmission Encoding Method 10Base-T Manchester coding:
100Base-TX 4B5B/MLT-3
Access Method CSMA/CD
Power Supply 12V AC 50/60Hz DC 3.3v, 2.5A
Operating Environment -20°C ~ 60°C
Item # RL80211N1W
Price: $109.95
Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
RadioLabs and are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -