RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
RadioLabs
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
Power Over Ethernet Adapter
 

Power Over Ethernet Adapter

Empower your LAN with these power over ethernet adapters. These can be used to run routers, web cameras, hot spots, and much more

 
Antenna Details

 

Power Over Ethernet

 

Power Over Ethernet 5V System POE 5V System
Includes: Power Supply, AC Power Cord
& 5V Splitter
Specs: Input 90-264VAC, Output 5VDC 2.4A
RadioLabs Low Price:
$59.95

In Stock

Power Over Ethernet 12V System POE 12V System
Includes: Power Supply, AC Power Cord & 12V Splitter
Specs: Input 90-264VAC, Output 12VDC 1A
RadioLabs Low Price:
$45.95

In Stock

Power Over Ethernet Splitter POE Power Supply & Inserter module
Includes: AC Power Cord
Specs: Input 90-264VAC, Output 48VDC at 0.35A 16.8W
RadioLabs Low Price:
$29.95

In Stock

Power Over Ethernet 5V Splitter POE 5V Splitter
Includes: Regulated Splitter Module with Output 5VDC at 2.4A 12W
RadioLabs Low Price:
$29.95

In Stock

Power Over Ethernet 12V Splitter POE 12V Splitter
Includes: Regulated Splitter Module with Output 12VDC at 1A 12W
RadioLabs Low Price:
$29.95

In Stock

View Your Shopping Cart

Power Over Ethernet

The POE adapter system is available in either 12V @ 1A or 5V @ 2.4A precision regulated outputs. The devices include built-in ESD/lightning protection to help in preventing equipment damage due to transients. They also have proprietary sensing algorithms which detect an overload or short circuit condition and shut down the supply to prevent equipment damage. The power supply unit is auto-ranging 90-264VAC 50/60Hz and has a removable AC cord for universal compatibility.

The units are rated for operation at -10 to +60 deg C and up to 90% humidity, so they perform reliably in outdoor weatherproof enclosures. The 5/12V DC power plug is a standard 5.5 x 2.1mm DC power adapter. The units are sold as a 12V or 5V set (Model Numbers: POE-48i12s and POE-48i5s) or can be purchased separately.

The POE adapter components gives “carrier class” performance in a low cost system. With its advanced auto-sensing algorithm it will supply power only to POE recognized end devices. This gives an added measure of protection against damaging equipment. The overload and short circuit protection will shut down power immediately when a short circuit is detected without any damage to the POE system. Because of its 48V inserter and regulated splitter, the installer doesn’t need to worry about voltage drops due to cable length. Typically in 100MB networks the maximum allowable CAT5 cable run is about 100 meters. This is not a limitation of the POE equipment but rather a limitation of the Ethernet standards. The POE-48 is not a proprietary unit. It will function with any equipment which meets the IEEE 802.3af POE standards. The POE system is available as a kit or as individual components depending on the customer’s needs. Power is supplied on ethernet pins 4/5 (V+) and 7/8 (GND).

Using power over Ethernet to power remote devices has several advantages including;
The power supply can be centrally located where it can be attached to an uninterruptible power supply. The user has the ability to easily power on reset the attached equipment from a remote location.

Back to WiFi Home

View all the RadioLabs Wifi antennas

 
 
Accessories
Coaxial Cable
 
802.11 Coax Cables

RadioLabs offers a full line of pre-made cables for your 802.11 installation. We have pre-made cables or you can have us custom make a cable for your specific application More......

RadioLabs Directional Yagi antennas   WiFi Yagi Antenna
If you purchase an omni antenna for your main "base station" antenna of your wifi system, it is best to purchase a directional antenna for your other systems for linking purposes. Click here to learn More......
Coax Seal
Coax Seal
Coax Seal is used to keep your coax connection on your external antenna weatherproof. Coax Seal is a "tape like" material which you simply wrap around the coax connector on all outside antenna connections. More......
Model #
Power Over Ethernet Supply/Injector
Input Voltage
90 – 264VAC @ 47 – 63Hz
Input Current
0.3A @ 120VAC
0.2A @ 230VAC
Inrush Current
<15A peak @ 120VAC
<30A peak @ 230VAC
Output Voltage
48VDC @ 0.35A
Output Ripple
1% Max
Switching Frequency
200KHz Typ
Line Regulation
+/- 0.5%
Load Regulation
+/- 1%
Operating Temperature
-10 to +60 deg C
Storage Temperature
-20 to +85 deg C
Operating Humidity
5% to 90% non condensing
Operating Humidity
5% to 90% non condensing
Size (L x W x H) 3.25” x 3” x 1.5” (83 x 76 x 38mm)
Weight 5.2oz (147gm)
AC Connector IEC-320 C6 (Supercom SC-14)
Data IN Conn. RJ45 Socket
Data/POE OUT Conn. RJ45 Socket

Model #
Splitter
Input Voltage
13.5 to 60VDC
Input Current
POE Splitter I: 5VDC @ 2.4A
POE Splitter II: 12VDC @ 1A
Output Ripple
1% Max
Switching Frequency
200KHz Typ
Line Regulation
+/- 0.5%
Load Regulation
+/- 1%
Operating Temperature
-10 to +60 deg C
Storage Temperature
-20 to +85 deg C
Operating Humidity
5% to 90% non condensing
Operating Humidity
5% to 90% non condensing
Size (L x W x H) 3.25” x 3” x 1.5”
(83 x 76 x 38mm)
Weight 4.6oz (130gm)
Data IN Conn. 12” Cable with RJ45 Plug
Data/POE OUT Conn. 12” Cable with 5.5 x 2.1 x
12mm Adapter Plugt
 
   
 
Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
 
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
 
RadioLabs and RadioLabs.com are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -