802.11g Wireless Router & Repeater Kit

The RadioLabs High power (250mW) Router/Repeater Kit is the most effective way to extend the range of your wireless network. With no additional external antennas you will be able to effectively double the range of your wireless network. Whether filling in dead spots or setting up a home/office wireless system the RadioLabs o2Link High Power Router/ Repeater kit is the way to go. With the addition of directional antennas you can set up a wireless bridge for even more range. Our wireless bridge kits (line-of-sight and non-line-of-sight) allow for a point-point installation for a distance of up to 5 miles. These are the same radios used in our bridge kits, so you can purchase this kit to make your own using any antennas RadioLabs offers.

Each Wireless Router/Repeater kit includes one High Power O2Point Access point / Repeater and one O2Link Router / Repeater. The router connects directly to any broadband Cable or DSL modem through the WAN port. The two units are then put into dedicated WDS + AP mode for simultaneous Bridge and repeat.

Wireless Security:

The RadioLabs O2Link Repeater kit has a revolutionary WPA2 security mode. It will allow you to do a simultaneous Bridge, Repeat and WPA2, WPA, WEP or MAC address filtering. You can't get a higher secuirty level on your wireless system.

The RadioLabs High Power Router Repeater kit is able to put out over 300% more power than standard G/Super G routers with the stock antennas! The addition of an Omni Antenna is a great way to dramatically increase area coverage. These units come with an RP-SMA connector for an external antenna. If you need to increase the range of this wireless router, take a look at our WiFi antennas, Wireless Amplifiers , and Point-to-Point Bridge Kits.

For more information on the RadioLabs Bridge radios, click here for the O2Point Access Point Or, click here For complete specs on the O2Link Wireless Router.

Back to WiFi Home

View all the WiFi Networking Devices