Wireless Link system - Bridge - Up to 5 miles.
RadioLabs New High-Power radios increase the bridge distance farther than ever before. New 1000mW B/G/N output radios are 3x more powerful than any of our previous bridge kits!
RadioLabs has recognized the need for a point to point system that will perform better in situations where complete line of sight is not possible. This kit will have much better penetration through minor trees and small obstructions because the Flat Panel Antennas are made with Circular Polarization.
In a nutshell, circular polarization means the antenna is better able to receive a clear signal due to the fact that the signal is both vertically and horizontally polarized at the same time. This effect enables the signal to penetrate through small obstructions and "twist" it's way through trees, leaves and small structures.
Our Flat Panel Antennas deliver 14 dB gain from the broadband location, direct to your desired link location. We call this a 5-Mile solution, but using the Wireless Calculator, it is good for over 20 miles. Overkill is always good when it comes to dependable links!
Lightning fast setup time - The CR15BGD5 can be deployed within 30 minutes. Simply mount the antenna to a pole, point the antennas, run the cable to the supplied router and your wireless connection is complete. You can access the internal configuration of each bridge completely wireless with the internal software once the connection is complete.
The CR15BGD5 is the perfect solution for sharing an internet connection where it is impossible to get a broadband connect. It is also perfect for data transfers, wireless file sharing, Business network links and even video streaming with lightning fast 802.11N network speeds with actual 100 Mbps throughput.
33 degree antenna pattern! Pointing your antenna is not critical when trying to obtain a link. Our flat panel antennas are very forgiving when you are trying to establish your link. If you point it in the approximate direction, you are close enough to get your wireless link working.
While our success rate using this bridge is extremely high, If you are unsure that you will be able to make a wireless connection using this kit, please call us to see if we have factory "Orphaned" or returned items in stock. These are cleaned and fully tested units, which carry RadioLabs same warranty. The units may have minor blems, dings or small dents.
(NOTE: This will not penetrate through dense forest for many miles. This will get around small obstructions, tree tops and minor obstructions. There is nothing in our inventory, or on the planet, which will penetrate through miles of dense forest and trees, major buildings, lines of homes for hundreds of yards. It is impossible to do this.This kit is used when you almost have line of sight to a path, but there are minor obstructions blocking your signal This is the best possible bridge kit available, using the newest technology that exists at this time. Switching to a lower frequency, such as our 900 MHz bridge kit, will help eliminate some issues. All radios, no matter what frequency, need some form of signal path to send the signal to or from a remote location. This is even more prevalent in 2.4GHz or microwave communications that is used for WiFi and wireless bridging. If you're in doubt as to the possibility of your bridge, please call our wireless experts at (707) 725-1024 to discuss your individual needs.)
To get a wireless signal through even greater, near, or mild non line of sight situation, please see our 900MHz wireless bridge kit
Kit includes either 10 or 20 feet of cable. There are 2 options when choosing your link.
See All of RadioLabs Wireless Bridge Kits