- Point to Point Wireless
Bridge-
RadioLabs Wireless Bridge Kit
is the best, most cost effective way to send a wireless internet
connection up to 5 miles line of sight. The RadioLabs Bridge5
kit is specifically designed as a low-cost link, with 802.11 B
and G capability and excellent security...
|
| |
|
|
Instant Wireless Bridging Kit
for wireless connections up to 5 Miles line of sight!! |
|
|
Kit with 20' Cable Option
|
|
| Kit Includes
- 2 x RadioLabs High Power Radios
- 2 x 15dB Backfire Antennas
- 2 x LMR-400 pre-made cables.
- Antenna mounting hardware.
- Power Supplies.
- Instruction manual.
- Stainless Steel Antenna hardware.
|
-
Instant Bridging up to 5 miles
-
2 x RadioLabs High Power 802.11 B/G radios
- Capable of heavy demands, such as video streaming and large file transfer
-
No software required
-
Web based administration
- 128-Bit Security Encryption. WPA (TKIP/Pre-shared key)
support
- Invisible SSID capability.
-
15 dB gain Backfire antennas.
-
Pre-built antenna cables for easy connection.
-
Stainless Steel mounting hardware
- DHCP addressing
- Advanced AP functions, including Access point mode, repeat
mode and bridging (if applicable)
- High Performance LMR-400 cable.
- Aluminum antenna and weather proof Radome enclosure.
- Includes mounting hardware and brackets.
- Remote administration through web browser.
- WDS dedicated bridge mode for faster throughput than our original bridge kit. Capable of miniature WISP applications
- Capability of complete rural home networking, VOIP, video
and more!
|
| |
|
|
Wireless
Link system - Bridge5 - Up to 5 miles.
NEW High Power O2Link Bridge Radios
Over 3x the power!!
RadioLabs now offers a complete,
pre-made wireless, point to point bridge solution. With our new
wireless Bridge5 bridging is now a breeze! RadioLabs new O2Link radios transmit 3x the power of the original bridge kit, giving you seamless bridging in our WDS dedicated bridge mode.
This is the simplest POINT to POINT
solution to deploy at an ultra low cost.!! 3 steps to network the radios, mount the antennas, install the cable and you're finished. Any technical minded person can install the RadioLabs O2Link Bridge kit in under an hour. In fact, the new kit is so easy, RadioLabs tech department can bridge a radio in 5 minutes and total install at both locations in under 30 minutes!! FAST!
Our backfire antennas deliver 15
dB gain from the broadband location, direct to your desired link
location. We call this a 5-Mile solution, but using the Wireless
Calculator, it is good for over 20 miles. Overkill is always
good when it comes to dependable links!
Lightning fast setup time - The Bridge5
can be deployed within 30 minutes. Simply mount the antenna to a
pole, point the antennas, run the cable to the supplied router and
your wireless connection is complete. You can access the internal
configuration of each bridge completely wireless with the internal
software once the connection is complete.
The Bridge5 is the
perfect solution for sharing an internet connection where it is
impossible to get a broadband connect. It is also perfect for data
transfers, wireless file sharing, Business network links and any
demanding application where B or G speed is required. The increased power output of the O2Link Router/AP may actually eliminate the need for an amplifier in most situations.
32 degree antenna pattern! Pointing
your antenna is not critical when trying to obtain a link. Our Backfire
antennas are very forgiving when you are trying to establish your
link. If you point it in the approximate direction, you are close
enough to get your wireless link working..
Kit includes either 10 or 20
feet of cable. There are 2 options available when choosing your bridge kit available. If you need different cable options, please contact us.
Back
to WiFi Home
|
|
 |
|
 |
|
|
|
|
|
| |
|
|
|
|
|
|
|
Coax Seal is used to keep your coax connection on your external antenna weatherproof. Coax Seal is a "tape like" material which you simply wrap around the coax connector on all outside antenna connections.
More...
|
|
 |
|
| |
|
|
|
|
|
|
|
RadioLabs NEW GS-2000 bridge system is the easiest to install and most cost-effective solution for long range network connections. Built around a completely rugged NEMA 6X enclosure, the GS-2000 is a fully weatherproof 2.4Ghz bridge system easily integrated into any LAN/WLAN network.
More...
|
|
|
|
| |
|
|
|
|
|
|
|
Special Sale - The RadioLabs RL24AAMP, the best deal ever on a Wireless amplifier. Due to overstock and a special purchasing arrangement, RadioLabs is proud to offer this ultra high-performance amplifier at a never before seen low price!
More...
|
|
|
|
| |
|
|
|
|
|
|
|
Extended coverage! - The Easiest way to extend the range of your Access point, Bridge, Router or Repeater! Screw it on, plug it in and have coverage for your entire home, or up to 1 mile line of sight!
More...
FAQ
|
|
|
|
|
| Model
# BRIDGE5 |
- High Power
Wireless Link - |
| Wireless
LAN (802.11g, 802.11b, WDS Bridging -) |
| Standards Compliance |
802.11b, 802.11g |
| Communication Protocol
|
Direct Sequence Spread
Spectrum (DSSS),OFDM |
| Frequency Range |
2,412 - 2,462 MHz
(1 - 11 channel) |
| Transmission Rate |
802.11g : 13, 20, 27, 40, 54, Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps |
| Access Mode |
Infrastructure mode,
WDS |
| Security |
WPA-PSK(AES, TKIP),
128/64-bit WEP, NEW WPA2* Encryption, Wireless Power Output Setting,MAC Address Registration
|
Standards
Compliance |
IEEE802.3u(100Base-TX) |
| Transmission Rate
|
10/100 Mbps |
| Transmission Encoding
Method |
100 BASE-TX 4B5B/MLT-3
10 Base-T Manchester Coding |
| Access Method |
CSMA/CD |
| LAN Port |
10/100 Mbps, Auto
Sensing, Auto MDIX |
| Number of LAN Ports |
4 main router- 1 - per bridge link |
| WAN Port |
10/100 Mbps, Auto
Sensing, Auto MDIX
High-Speed Routing to Support FTTH |
| Number of WAN Ports
|
1 - per link |
| WAN/LAN Port Connector |
RJ-45 |
| Security |
Dynamic Packet Filtering,
Intrusion Detector, NAT/SPI Firewall, Watchdog Timer |
| Communication
Range |
| With 15dB Antenna |
5+ Miles @ 11MBPS LOS |
|
|
| All distances
are estimated. Wireless connections may be affected as physical
conditions and circumstances vary. |
| Support Available
for |
Windows 98SE, 2000,
ME , XP and Macintosh (MAC OS 10.2.6
and higher) |
| Package Contents |
(1) RadioLabs Wireless Router (1) RadioLabs Wireless Access Point/Bridge, Power Supplies, Ethernet cable, Setup CD with User Manual,
Quick Setup Guides, (2) BackFire 15 Antennas and
2 lows-loss cables. |
Other |
| Power Supply |
120V AC~
60 Hz |
| Power Consumption |
About 3.4 W (Max)
per link |
| Dimensions |
1.1 x 5.1 x 5.7 in.
(28 x 130 x 144 mm) |
| Weight |
12 lbs |
Item # BRIDGE5
Price: $374.95 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
