♠ WiFi | Wireless Amplifier 400 mW

WiFi Amplifier

2.4 GHz Wireless Amplifier
Extend the range of your wireless network with RadioLabs indoor/outdoor 400 MilliWatt Amplifier. This is a great deal for a weatherproof wireless amplifier.






Features Bi-directional amplifier for IEEE 802.11b Automatic gain control to minimize the signal distortion Wide transmit input level, +7dBm to +20dBm Low noise amplifier with system noise figure 3.5 dB Universal 110/220 AC auto switching AC Adapter for 12V DC power injector Built-in Lighting protection DC power injector equipped with lighting protection Industrial standard N typeconnector Outdoor all weather-proof enclosure

400 MilliWatt Wireless Amplifier

RadioLabs offers absolutely the best amplifier for the money. Our amplifier is a 400 milliwatt weatherproof kit complete with a DC injector, AC adapter and mast mounting kit. This is the most radical way to increase the distance of your wireless system.

This will allow you to increase the power of your wireless card or router from a typical 30 milliwatt transmit output to 400 milliwatt. In addition to increasing the transmit power, the incoming receive signal is also amplied by

Note: These wireless amplifiers are FCC compliant with low gain 802.11 antennas, licensed ham radio operators, military, and export applications. Please check local regulations prior to ordering.

The WiFi amplifier package includes the 400 milliwatt bi-directional 802.11b booster, DC Power Injector, AC Power Cord, 12V DC Adapter, and a U-bolt mounting kit.

All Buffalo products currently offered on RadioLabs site, and the majority of consumer grade wireless equipment, will work with any amplifier currently listed on our site.

Amplifiers cannot be used with RadioLabs Long Range Notebook Cards High Power, Access Points, or any wireless device generating more than 100mW output. These products will burn out any amplifier, and will void all warranties.

Back to WiFi Home

View all the WiFi Amplifiers

Click here to see a hook-up diagram of this amplifier.

Model #

400 MilliWatt Wireless Amplifier

Operating Conditions

Operating
Temperature Range

Normal: +15°C ~ +35°C
Extreme: -30°C ~ +70°C

Operating
Humidity

5% to 95% RH

Storage Temperature

40°C ~ +80°C

Supply Voltage

AC 100V~240V
50/60Hz DC 12V/1A

Electrical Conditions

Access Method

DS/TDD

Operating Frequency

2.4GHz ~ 2.5GHz

Spurious Emission

30MHz ~ 1 GHz : -36dBm(max.)
1GHz ~ 12.75 GHz : - 30dBm(max.)

Transmitter Specifications

Tx output power variation

25°C: 26dBm ±1dB(Pin=13dBm)
-30°C: 26dBm ±2dB(Pin=13dBm)
70°C: 26dBm ±2dB(Pin=13dBm)

Tx output power vs. Input
Power

26dBm ±1dB(Pin=7~20dBm)
26dBm ±2dB(Pin=7~20dBm)
26dBm ±2dB(Pin=7~20dBm)

Tx ACPR ±11MHz

-30°C ~ +70°C: 30dBc (max.)

TX on/off control time

30°C ~ +70°C: 5us (max.)

Receiver Specifications

Rx Gain

-30°C ~ +70°C: 10dB(min.)

Rx Gain Flatness

25°C: ±1dB
-30°C: ±2dB
70°C: ±2dB

Rx Noise Figure

-30°C ~ +70°C: 3.5dBm (max.)

Rx Third Intercept Point

-30°C ~ +70°C: 30dBm (max.)

Rx Return Loss

-30°C ~ +70°C: 14dB(min.)

Rx on/off control timing

-30°C ~ +70°C: 2us (max.)

Current Consumption

Tx Current

700mA (max.): -30°C ~ +70°C

Rx Current

130mA (max.): -30°C ~ +70°C

Package Contents

1. 400 mW Booster
2. AC Power Cord
3. DC Power Injector
4. Mast Mounting Kit
5. 110/220 AC, 12V/1A DC Adapter
6. User’s Manual

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

More Information

RadioLabs and RadioLabs.com are copyright. The contents of these webpages are © RadioLabs International Inc., 2003-2007. All rights reserved. If you experience any problems with our site, please contact our webmaster

2.4 GHz Wireless Amplifier Extend the range of your wireless network with RadioLabs indoor/outdoor 400 MilliWatt Amplifier. This is a great deal for a weatherproof wireless amplifier.

2.4 GHz Wireless Amplifier
Extend the range of your wireless network with RadioLabs indoor/outdoor 400 MilliWatt Amplifier. This is a great deal for a weatherproof wireless amplifier.