NEW! - The O2Surf, multifunction Wireless Adapter from RadioLabs!
802.11 B/G/N - 150MBPS Bridge, Access Point, Repeater, Client - The only WiFi tool you need!
The best High Power, outdoor wireless tool designed
A new member to the RadioLabs family of cutting edge wireless equipment, the O2 Surf is the all-in-one device designed to solve many of the networking issues individuals and companies face today. With its N-Male antenna connector, the O2 Surf connects directly to any 2.4ghz antenna offered by RadioLabs. Simply select an omni-directional wifi antenna, or a directional wifi antenna from our online catalog, we have universally matched our antennas, so any N-Female cable or antenna will screw directly onto the O2Surf's wifi connector. Furthermore, in the instances that a coax cable is necessary, users can deploy their equipment with the confidence that signal loss will be minimal. This means optimal speeds, increased stability, and extended coverage of their wireless networks.
The O2 Surf can be configured to operate in several modes:
Client Mode, in which the device receives its signal through its antenna port, exporting it to the Ethernet port
Access Point Mode, where your device creates its own powerful, secure wireless network by simply connecting to one of the LAN ports on your existing router.
Bridge Mode, in which two of the devices are used to form a seamless point to point link at a distance of several miles (using properly aimed directional antennas). The O2 Surf can even be used as a router, with the proper configuration.
Repeater Mode, is a special operation mode which allows the O2Surf to receive another wireless radio, and rebroadcast it with another broadcast signal name (SSID) or with the same SSID.
With the flick of a software switch, you can configure the O2Surf to receive and transmit wifi from any remote building within range. This is the perfect wireless tool and can perform any wireless function! Maintain ultra fast speeds with the 802.11 B/G/N connection modes, with up to 150 MBPS wireless speed! It's a full tool kit of wireless options to convert the O2Surf literally into a High Power Access Point, a Client to connect to far away access points, a repeater, to repeat any access point out there, or even set it up to put in a permanent connection to the mother in law's building, your garage, out-building or leave it up to your imagination.
Now running RadioLabs very own streamlined user interface, setup and integration is a breeze. Simply attach your RadioLabs antenna, power up the device and connect it to your computer, login and make the necessary changes, and your network will be up and running in no time. Due to the O2 Surf being powered via POE (Power-Over-Ethernet), you don’t even need to run a power supply to the bridge, just use the included power injector and your bridge has power and data transmitted over CAT-5 cabling! Plus, with its robust, weatherproof casing designed to withstand the harshest of outdoor elements, the O2 Surf is the perfect solution for almost any networking solution.
Just add an antenna and ethernet cable! This is the only outdoor wireless tool you need to perform virtually any wifi task. With a simple mode change, the O2Surf can be changed to a bridge, to link two buildings for internet for miles around, a repeater to light up any RV Park, Marina, Camp, or literally saturate any area in wifi. They can repeat, or "daisy chain" together, to form a network of almost unlimited size, while retaining low overhead and FAST speed.
- The O2 Surf provides more than 800mW (+ 29dBm) of output power and delivers:
- Most sensitive chipset in it's class. Output power is no longer critical because O2Surf uses one of the most sensitive receiver chipsets on the market!
- 150+Mbps real TCP/IP throughput traffic at 802.11 B, G or N speeds. Selectable via software interface.
- Weather-proof and powered via POE (Power Over Ethernet). Run power plus data up to 330 feet from it's power source.
- Updated simple and intuitive user interface for effortless navigation. Easy configuration modes, make programming simple.
- Easy user manuals allow for step by step programming to easily setup your O2Surf to connect, repeat, or virtually any wireless function imaginable. No more looking for what device to buy, the O2Surf will literally do anything.
- Compatible with any 2.4 GHz wifi antenna
- Can be utilized in Point-to-Point (PTP) bridging or Point-to-MultiPoint applications. Made to seamlessly bridge two locations, almost like you dug a trench and ran cable.
- Will perform virtually any wireless mode through firmware setup.
NOTE: This is not a Bullet. The WiFi Bullets we offer are available here:
The O2Surf is much more sensitive, easier setup and configuration, lower cost and ability to broadcast multiple SSIDs. There are many other differences, but the RadioLabs O2Surf is a superior product to the WiFi Bullets. (If you have an existing install using our Bullets, these will still communication with them, however, it is best if you already own our first generation and want seamless WDS, please purchase the Bullet)
Coming soon ... Instant bridges, Repeaters, Client kits and more.. If you would like to use this radio for any function, please call us. We will set up a customized kit for you on the phone! There's nothing lower cost on the market that will perform so many wireless functions inside one device!