RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
WiFi Amplifier

Amplifier Sale - 2.4 GHz Wireless Amplifier
Extend the range of your wireless network with RadioLabs RL24AAMP 1-Watt Amplifier. This is a great deal for a weatherproof wireless amplifier.

Antenna Details
This item is not currently available.
View Your Shopping Cart


  • Bi-directional amplifier for IEEE 802.11B/G and Super G Dual Band compatible.
  • Rugged outdoor housing
  • Automatic gain control to minimize the signal distortion
  • Wide transmit input level, +5dBm to +20dBm
  • Low noise amplifier with system noise figure 3.5 dB
  • Universal 110/220 AC auto switching AC
  • Adapter for 12V DC power injector
  • DC power injector equipped with lighting protection
  • Industrial standard N-Female type connector
  • Outdoor all weather-proof enclosure

1-Watt Wireless Amplifier w/mounting hardware.

Believe it or not, RadioLabs is offering a full 1-Watt INDUSTRIALQUALITY outdoor amplifier, with power injector and mounting hardware for $179.95. This is the lowest price for one of the highest quality amplifiers on the market!! This is a gift to our wireless customers!

The RL24AAMP capable of surviving extreme outdoor temperature and humidity changes, from the Middle East, to the polar regions, this rugged, completely weatherproof outdoor amplifier can withstand extreme environmental conditions.

Each unit is tested 3 times before being shipped. An assembly line ON/OFF Test is followed by an RF Power Output Test, and then the process is terminated with an RF
Power Consistency Test. Following the final assembly testing, each unit is individually packaged and shipped to the end user. There is no better performing, or higher quality Outdoor RF Power Amplifier than the RL24AAMP.

Note: These wireless amplifiers are FCC compliant with low gain 802.11 antennas, licensed ham radio operators, military, and export applications. Please check local regulations prior to ordering.

The WiFi amplifier package includes the 1-Watt bi-directional 802.11B/G Super 'G booster, DC Power Injector, AC Power Cord, 12V DC Adapter, and a U-bolt mounting kit.

The AC power adapter works worldwide with 50HZ 220V power adapter plug.

Back to WiFi Home

View all the WiFi Amplifiers

Click here to see a hook-up diagram of this amplifier.

Wifi Amplifier hook-up

Note: Coaxial cables are not included. For cable information, please go here

WiFi Amplifier 2 Watt

We offer the best WiFi amplifier for the money. This a 2-Watt amplifier with weatherproof kit, DC injector and 110 or 220 VAC adapter. This is the most radical way to increase the distance of your wireless system. This will allow you to increase the power of your wireless card or router from a typical 30 milliwatt transmit output to 2 Watts.   More...

RadioLabs Wireless Router Repeater Kit

Effectively get 4x the range or your wireless network! The RadioLabs O2 High Power Smart Router Repeater Kit is not only high-speed, but also has a high power output.   More...

Commercial Wireless Amplifier || 802.11

The Luxul241W is the highest performance AGC amplifier on the market, with guaranteed performance at 1-watt output for 802.11 B/G applications.   More...

Wireless Range Extender Amplifier

Extended coverage! - The Easiest way to extend the range of your Access point, Bridge, Router or Repeater! Screw it on, plug it in and have coverage for your entire home, or up to 1 mile line of sight!   More...   FAQ

Wireless Pigtail cables

If you don't need a long extension cable or have a wireless device with an MC or MMCX connector, we have inexpensive pigtails that will allow connectivity with our WiFi antennas   More...

Model # RL24AAMP
1-Watt Industrial Wireless Amplifier
Operating Conditions
Temperature Range
Normal: -10°C ~ +50°C
Extreme: -30°C ~ +70°C
5% to 100% RH
Storage Temperature -40°C ~ +90°C
Supply Voltage AC 100V~240V
50/60Hz DC 12V/1A
Electrical Conditions
Access Method DS/TDD
Operating Frequency 2.4GHz ~ 2.5GHz
Spurious Emission 30MHz ~ 1 GHz : -36dBm(max.)
1GHz ~ 12.75 GHz : - 30dBm(max.)
Transmitter Specifications
Tx output power variation 25°C: 30dBm ±1dB(Pin=13dBm)
-30°C: 30dBm ±2dB(Pin=13dBm)
70°C: 30dBm ±2dB(Pin=13dBm)
Tx output power vs. Input
30dBm ±1dB(Pin=7~20dBm)
30dBm ±2dB(Pin=7~20dBm)
30dBm ±2dB(Pin=7~20dBm)
Tx ACPR ±11MHz -30°C ~ +70°C: 30dBc (max.)
TX on/off control time 30°C ~ +70°C: 5us (max.)
Receiver Specifications
Rx Gain -30°C ~ +70°C: 10dB(min.)
Rx Gain Flatness 25°C: ±1dB
-30°C: ±2dB
70°C: ±2dB
Rx Noise Figure -30°C ~ +70°C: 3.5dBm (max.)
Rx Third Intercept Point -30°C ~ +70°C: 30dBm (max.)
Rx Return Loss -30°C ~ +70°C: 14dB(min.)
Rx on/off control timing -30°C ~ +70°C: 2us (max.)
Current Consumption
Tx Current 1000mA (max.): -30°C ~ +70°C
Rx Current 130mA (max.): -30°C ~ +70°C
Package Contents 1. 1-W Booster Amplifier
2. AC Power Adapter
3. DC Power Injector
4. Mast Mounting Kit
5. 110/220 AC, 12V/1A DC Adapter
6. User’s Manual
Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
RadioLabs and are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -