RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
RadioLabs
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
Bullet-Omni WiFi Antenna

Bullet-Omni 12 Kit- Access Point / Client
Now with a more powerful antenna, the ability to reach further distances is within your grasp. Great for the marine environment or the RV'ers, the Bullet-Omni 12 Kit is a addition to your wifi network you want to have included.

Antenna Details
High Gain WiFi Antenna

Bullet-Omni 12 Kit with 25 ft Ethernet Cable

RadioLabs Low Price:
$259.95

In Stock


Bullet-Omni 12 Kit with 50 ft Ethernet Cable

RadioLabs Low Price:
$269.95

In Stock


View Your Shopping Cart

Bullet Omni 12 Kit Includes:

  • Bullet Wireless Platforms
  • 12dBi Omni Directional Antenna
  • 12v POE Injectors for Bullet
  • 25' or 50' RJ-45 Ethernet cable
  • 2ft Coax Cable
  • Free Coax Seal
  • Free Antenna Mounting Hardware

Instructions:

Bullet Access Point Guide

Bullet Client Guide

The Bullet has an extremely high power output. User is responsible to ensure that product meets their Federal, State and local government guidelines.

Bullet-Omni 12 Kit AP/Client

- The Bullet paired with the 12dB Omni antenna as an Access Point - Setup and integration into your existing system or home network is as simple as can be. Simply attach the Bullet to the 2.4Ghz 12dBI antenna with the integrated N-Male connector, connect the included POE injector with any standard CAT-5 Ethernet cable and the Bullet is ready to connect to your existing LAN network (wireless router). This will allow you to create a new signal separate from your already existing router.


Fully weather-proof and powered via POE (power-over-ethernet), the Bullet along with the antenna produces a secondary signal separate from the primary router.  This allows you to extend your signal to areas inside and/or outside where your wireless network is not able to reach.


- The Bullet paired with an 12dB Omni antenna as a Wireless Client- With the Bullet attached to the 12dB antenna you can now connect to an already existing LAN network and rebroadcast at a different location. Simply attach the antenna to the Bullet, run ethernet cable from the Bullet to the back of a router/access point and you now have a LAN connection at the second location.


The Bullet - High Speed Wireless Platform provides more than 600mW (+ 28dBm) of output power (over 10 times the power of a standard off the shelf wireless router or bridge). This high power output, when combined with a high gain antenna, allows for much longer range and greater connectivity.

 

 


The Bullet Access Point

Bullet AP Diagram

Back to WiFi Home

 
 
Accessories
 
WaveRV Marine - Wireless Marine Antenna

With our powerful internal wireless card combined with an 8dB omni antenna the WaveRV Marine gives an amazing performance boost over integrated wireless and stock cards. Typical results give up to 30 times the range of notebooks with integrated wireless.   More...

........
 
High Power Access Point 600

Wireless Access Point | Bridge | Repeater - One of the best access points available. If you are looking for the best possible Wireless Access Point, the RadioLabs RL 3022 Deluxe AP is one of the most powerful and configurable wireless access points available. It can be configured as an AP, Bridge or Wireless Repeater.   More...

........
 
1 Watt High Power Router - O2Breeze

With our already extensive line-up of high power routers, the O2Breeze is no exception to the rule when it comes to performance and reliability. With 802.11 b/g/n speed capability of up to 150 mbps, its exactly that, a breeze.   More...

........
Bullet
Device Specifications
IEEE Communication Protocols 802.11B / 802.11G / 802.11N / 802.3
Frequency Band 2.4 ~ 2.5 GHz
System Information Processor Specs: Atheros MIPS 4KC, 180MHz
Memory Information: 16MB SDRAM, 4MB Flash
Regulatory/Compliance Information

Wireless Approvals: FCC Part 15.247, IC RS210

RoHS Compliance Yes
2.4Ghz Receiver Specifications
Receive Sensitivity (Typical)

802.11B/G:
-83dBm (+/-2dB) @ 24Mbps
-80dBm (+/-2dB) @ 36Mbps
-77dBm (+/-2dB) @ 48Mbps
-75dBm (+/-2dB) @ 54Mbps

802.11N:
-96dBm (+/-2dB) @ MCS0
-95dBm (+/-2dB) @ MCS1
-92dBm (+/-2dB) @ MCS2
-90dBm (+/-2dB) @ MCS3
-86dBm (+/-2dB) @ MCS4
-83dBm (+/-2dB) @ MCS5
-77dBm (+/-2dB) @ MCS6
-74dBm (+/-2dB) @ MCS7

Transmitter Specifications
Avg TX Power 22dBm - 28dBm (-/+ 2dBm)
TX Linear output Power 600 mW / +28 dBm
Channels 11 for North America, 14 for Japan, 13 for Europe, 2 for Spain, 4 for France
TX/RX Switch Time < 1µsec
Channel Width Up to 40Mhz
User Interface
Diagnostic LED

Power: ON/OFF - Transmit/Receive -
Signal Strength Indicator

Configuration Interface
Configuration via web browser - no software required. Firmware : AirOs V5
Power Requirements
DC Supply Voltage

15V .8A via included POE injector.

Max Power Consumption 7 Watts
Security
Wireless Security and available network security features IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS)-AP mode
WPA - Wi-Fi Protected Access
PSK (Pre shared key) with 64/128-bit WEP Key
EAP-MD5/TLS/TTLS authenticator (AP Mode)
TKIP
MAC address filtering (WLAN)
Hide SSID in beacons
Layer 2 Isolation
Mechanical Specifications
Data Connector Type RJ-45 10/100 Category 5
RF Connector Type Integrated N-type Male Jack (connects directly to antenna)
Enclosure Characteristics Outdoor UV Stabilized Plastic
Enclosure Size 15.2cm. length x 3.1 cm. height x 3.7cm. width
Weight 0.18kg (enclosure only)
Operating Temperature -40C to +80C
Operating Humidity 5 to 95% Condensing
Omni 12 WiFi Antenna
Frequency Range
2400 - 2500 MHz
VSWR
<1.4 @ 100MHz bandwidth
Impedance
50 Ω
Gain
11.8 dBi
Polarization
Vertical - 360° omni-directional
Electrical Downtilt
E-Plane
Half power beamwidth - 9°
E-Plane E-Plane
Click Here to See Larger Image
Max. Power input
150 Watts
Ground
Direct Ground (not required but advised)
Connector type
N-Female
Structure
Fiberglass vertical mast, aluminum base
Weight
2.1 pounds (976 grams)
Max wind velocity
130++ mph
Length
36" (.9 meters)
Supporting pole
¤35~¤55 mm
Item # BO8KIT-25
Price: $239.95
Item # BO8KIT-50
Price: $249.95
 
 
Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
 
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
 
RadioLabs and RadioLabs.com are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -