RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
BuffaloWireless Router & Repeater

Buffalo AirStation 54Mbps 802.11g Wireless Router & Repeater Kit

The Buffalo AirStation Router & Repeater Kit will allow you to provide maximum range to your network and fix the dead spots in your long distant WiFi setup.

Antenna Details
802.11g Wireless Router & Repeater Kit
RadioLabs Low Price:

In Stock
View Your Shopping Cart
  • WLA-G54C Repeater Laptop Magazine Editor’s Choice
  • WBR-G54 Router – Buffalo’s Most Popular 54g Product
  • 802.11g 54Mbps High-speed Wireless
  • No configuration required for the repeater
  • Doubles the range of your Wireless Network
  • Access the Internet from anywhere in your environment
  • Cover “dead spots” or extend your wired LAN

802.11g Wireless Router & Repeater Kit

The Buffalo WRB-G54K Wireless Router and Repeater Kit allows you to create your high-speed Wireless broadband network and double your Wireless range at the same time. The kit includes both the Buffalo WBR-G54 802.11g Broadband Wireless Router, and the WLA-G54C 802.11g Wireless Repeater Bridge. Simply set up the Router to connect to your Cable or DSL Modem, locate a spot for the repeater that provides maximum coverage, and plug the repeater in (no setup on the repeater required!). The WLA-G54C repeater is pre-configured with Buffalo’s WDS (Wireless Distribution System) that repeats your Wireless signal and instantly doubles the range of your Wireless Network. Get twice the distance and lightning fast 54Mbps speeds for your home or office networks with the Buffalo Wireless Router and Repeater Kit.

This router comes with an MC-Card connector for an external antenna. If you need to increase the range of this wireless router, take a look at our WiFi antennas.

Back to WiFi Home

View all the WiFi Networking Devices

Coaxial Cable
802.11 Coax Cables

RadioLabs offers a full line of pre-made cables for your 802.11 installation. We have pre-made cables or you can have us custom make a cable for your specific application More......

RadioLabs Directional Yagi antennas   WiFi Yagi Antenna
If you purchase an omni antenna for your main "base station" antenna of your wifi system, it is best to purchase a directional antenna for your other systems for linking purposes. Click here to learn More......
Coax Seal
Coax Seal
Coax Seal is used to keep your coax connection on your external antenna weatherproof. Coax Seal is a "tape like" material which you simply wrap around the coax connector on all outside antenna connections. More......
Model #
Buffalo AirStation
Wireless LAN (for Router & Repeater)
Standards Compliance IEEE802.11b (Wireless LAN Standard)
IEEE802.11g (Proposed Draft Standard)
Frequency Range 2.412-2.462GHz (1-11ch)
Transmission Rate 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
Security Wi-Fi Protected Access™, AES, 802.1x, 128-bit WEP,
password, MAC Address registration
Access Mode Infrastructure Mode, WDS (up to 6 units)
Antenna Diversity Method (Internal)
External Antenna Connector MC
Output Power Output Power
Selectable Channels 11 Channels (3 non-overlapping)
Communication Protocol Direct Sequence Spread Spectrum (DS-SS),
Half Duplex, OFDM
Wired LAN and Others (for Router)
Interface IEEE802.3 (10Base-T/100 Base-TX)
Transmission Rate 10/100Mbps (autosense)
LAN Ports / Connector Four (4) 10/100 Base-T RJ-45 ports (Auto MDI/X)
Transmission Encoding Method 10Base-T Manchester coding:
100Base-TX 4B5B/MLT-3
Access Method CSMA / CD
WAN Port / Connector One (1) RJ-45 port
Power Supply 100-120V AC 50/60Hz DC 3.3v, 2.5A
Dimensions W3xH6.75xD6.1 in. (76x171x155mm)
Weight 1 lb. (445g)
Operating Environment 0-40° C, 20-80% humidity (non-condensing)
Wired LAN and Others (for Repeater)
Interface IEEE802.3 (10Base-T/100 Base-TX)
Transmission Rate 10/100Mbps (auto sense)
LAN Ports / Connector One (1) 10/100 Base-T RJ-45 ports (Auto MDI/X)
Transmission Encoding Method 10Base-T Manchester coding:
100Base-TX 4B5B/MLT-3
Access Method CSMA/CD
Power Supply 100-120V AC 50/60Hz DC 3.3v, 2.5A
Dimensions W2.3xH4.8xD3.5 in. (58x120x89mm)
Weight 4.4 oz. (100g)
Operating Environment 0-35º C, 25-80% humidity (non-condensing)
Item # WK
Price: $149.95
Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
RadioLabs and are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -