RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
WiFi - Wireless Bridge System

- Wireless Bridge Solution - B, G and N Speed Wireless Bridge Kit (w/POE) -
Manufactured by RadioLabs, the NEW GS2000 IMPROVED, is a high performance, high output 802.11 B/G/N bridge system. Guaranteed 5 miles or greater bridging and up to 10 mile connection with ease! Complete Radio/Antenna and POE bundle.

Antenna Details

Instant Wireless Bridging system for wireless connections 5 - 10 miles with ease!

Note: This system includes two (2) GS1000 units for a point to point bridge system

This item is not currently available.

Have us pre-configure your bridge kit for you.
RadioLabs Low Price:

In Stock

View Your Shopping Cart

RadioLabs New GS-2000 Wireless Bridge is the bridge solution on the market. Each unit even includes a WAN Gateway!


Click here to View Back

GS2000 - Wireless bridge open



  • RadioLabs powerful 1000mW 802.11 B/G/N wireless radio/router/ap/bridge, with seamless WDS bridging.
  • Capable of heavy data streaming demands, such as video file transfer, VOIP. 77.2MBPS throughput* based on range and packet transmission over distance.
  • No software required. Runs with any PC and can even be programmed through a PDA or cell phone browser.
  • Web based administration tools and software can be managed wireless or wired from both ends.
  • 128-Bit Security Encryption. WPA and WPA2 (TKIP/Pre-shared key) support.
  • Invisible SSID in WDS mode.
  • Simply mount, point and you are bridged.
  • Built in Power Over Ethernet to LAN port and WAN gateway.
    Buit in WAN gateway for instant internet.
  • Built-in 16dB hinged directional antenna.
  • Stainless Steel mounting hardware
  • DHCP addressing function selection with advanced NAT gateway and forwarding to combine or isolate networks.
  • Advanced AP functions, including Access point mode, repeat mode WDS, Client and bridging.
  • High Quality Aluminum Enclosure
  • Weather resistant fiberglass antenna Radome.
  • Remote administration through web browser, or can be programmed remote via internet.
  • Ability to open remote ports for management of other equipment behind gateway. Built in web server functions. Advanced routing and can function as bridge as well as access point simultaneously if required.
  • Most advanced bridge capabilities and 100% compatible with any and all wireless equipment * excluding WDS mode for seamless integrated bridging.

802.11 B/G/N Bridging System for instant, long range wireless connections.

RadioLabs NEW and Improved GS-2000 bridge system is the easiest to install and most cost-effective solution for long range network connections. Built around a completely rugged NEMA 6X aluminum heat sink enclosure, the GS-2000 is weatherproof. The adjustable 1000mW high performance radio in the GS2000, combined with 16dB integrated antenna, permit long range bridging with very little setup. This is the most rugged, most dependable and reliable 802.11 bridge system we offer, runs on CAT-5, simple programming for high speed connection. Works in EVERY single WiFi mode, to ensure robust operation, with ability to bridge, become access points, multiple SSID traffic to allow other uses and has too many features to list.

This is your total POINT to POINT solution in a bundled package!! (You supply your CAT-5 cable length)

Our NEMA 6X enclosure with integrated RF Shielded panel, is the highest quality aluminum enclosure made. RadioLabs now sets the standard for durability, environmental stability and impact proof protection of your wireless radio equipment. The flat panel on the surface will resist rain, snow and ice build-up and the heavy duty stainless steel mounting hardware will increase the life of your wireless installation for years to come. First thoughts of someone who sees these units are "That's absolute overkill and the best looking antenna and radio they've seen".

Lightning fast setup time - The GS2000 can be deployed within 5 minutes. Simply mount to a pole, point the antenna, run the cable to your computer or router and your wireless connection is complete. You can access the internal configuration of each bridge completely wireless with the internal software. Bridging instructions are included for easy installation.

The GS-2000 has the ability to work as a bridge, access point or even configuration as a wireless repeater system for instant connection to any other wireless system. RadioLabs Universal repeater mode allows instant repeating of any wireless signal, regardless of brand or make.

Security - The GS-2000 bridge kit can do what most of the competition cannot... Simultaneous WDS or WDS+AP Bridging at the same time as WPA2 encryption. Our firmware allows the most advanced encryption and bridging of multiple GS-2000 units simultaneously. Any single wireless, router, LAN or WAN gateway function is permissable. High power B, along with G and N speed bridging, allows for automatic adjustment in antenna's output power, as well as maximum throughput possible on 2.4 GHz..

30 degree antenna pattern! Close counts in horseshoes, grenades and pointing the GS2000 wireless system. Simply pointing the antenna and setting up the software can customize your wireless solution for any long range or backhaul application. For technical support or wireless solution advice, please call us at: 877-575-3700 toll free.


See All RadioLabs WiFi Bridge Kits

Wireless Bridge Hardware - Zoom

Click here to Zoom on GS-2000 Bridge

One Bridge kit pictured above. The GS-2000 kit comes with 2 x wireless bridge hardware listed above.

- Wireless Building Link -
WiFi Antenna Large Mount

We have a variety of antenna mounts that allow you to easily mount your WiFi antennas indoors or outdoors. The attractive design and 90 adjustable tilt makes them very useful in many applications.   More...

High Gain Backfire Wireless Antenna

The Backfire WiFi Antenna has very good gain for such a small antenna. Performance on 2.4 GHz is excellent!! The 15 dB Backfire is the antenna we recommend for extended wireless coverage or building to building links.   More...

o2Air-AC - High power 802.11AC router

The NEW o2Air-AC, High Power 802.11AC router from RadioLabs is a masterpiece in wireless networking technology. Say goodbye to laggy video and demanding network transfers with blazing fast 1170 MBPS wif network connectivity and the horsepower of 4 x 1-watt 2.4 and 5.8 GHz amplifiers. The future of networking is here.   More...

Ultimate Long Range Mobile WiFi Kit

Ultimate WiFi Long Range Package - 300mW output and 7dB gain!! The RadioLabs Ultimate Mobile Wifi kit is perfect for the WiFi Warrior. If you are into mobile WiFi, you can't get a more potent combo under $300.   More...   FAQ

Model #GS2000-16
- Wireless Bridge System-
Amplifier Specifications
Frequency Band 2.4 ~ 2.5 GHz
802.11 specifications IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u compliant
Signal Type Orthogonal Frequency Division Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
Receiver Specifications
Receive Sensitivity (Typical) -94dBm @ 1Mbps -92dBm @ 6Mbps -83dBm @ 24Mbps
-92dBm @ 2Mbps -90dBm @ 9Mbps -79dBm @ 36Mbps
-89dBm @ 5.5Mbps -88dBm @ 12Mbps -74dBm @ 48Mbps
-86dBm @ 11Mbps -86dBm @ 18Mbps -72dBm @ 54Mbps
N Speed specifications available by request.
RX Power Gain
up to 17 dB
Transmitter Specifications
TX Input Power 0 ~ +30 dBm
TX Power Gain 1000mW + 16dB integrated panel
TX Linear output Power 1000 mW / +30 dBm
Channels 11 for North America, 14 for Japan, 13 for Europe, 2 for Spain, 4 for France
TX/RX Switch Time < 1µsec
User Interface
Diagnostic LED

Power: on/off
Lan port functions - Wifi

Power Requirements
DC Supply Voltage

Power Over Ethernet supply included, or can be powered with 7-12VDC power supply.

Current Consumption 550 mA maximum during TX
Wireless Security and available network security features IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS)-AP mode
WPA - WiFi Protected Access (WPA2)
PSK (Pre shared key) with 64/128-bit WEP Key
EAP-MD5/TLS/TTLS authenticator (AP Mode)
MAC address filtering (WLAN)
Hide SSID in beacons
Layer 2 Isolation for network security.
Mechanical Specifications
RF Connector Type RP-SMA type internal, optional N-Female external for splitter operation
Operating Temperature -20 °C ~ +70 °C Guaranteed specs.
Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
RadioLabs and are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -