RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
Indoor WiFi Amplifier

2.4 GHz Wireless Indoor Amp
Extend the range of your wireless network with
the RadioLabs Wireless 1-Watt Indoor Amplifier. This is one of the easiest amplifiers to install and use and only requires 2 cables to connect to your wireless device.

Antenna Details
Wifi Amplifier - Indoor
RadioLabs Low Price:

In Stock
View Your Shopping Cart

Indoor Amplifier Features

  • Bi-directional amplifier for IEEE 802.11B/G and Super G Dual Band compatible.
  • 1000mw (+30dBm) gain increase
  • One-Piece Aluminum Construction
  • Automatic gain control to minimize the signal distortion
  • Heavy-Duty Casing
  • Low noise amplifier with system noise figure 3.5 dB
  • Universal 110/220 AC auto switching AC
  • Easy to install
  • Industrial standard N-Female type connector
  • Made in USA

1-Watt Indoor Wireless Amplifier

This One-Watt (1000mw) Wireless Indoor Amplfier delivers high power output in a small easy-to-use package. This amplfier will boost the receiving and transmitting power of your wireless device a whopping 30 dBm.

The IND1WATT24 is designed with the power injector and the amplifier unit built into a single housing, so there is no need for the extra cabling required with most other 1 watt amplfiers. You only need 2 cables to utilize the amplifier, one cable to connect the wireless device you are amplifying to the input side of the amplfier and one cable to connect the output side of the amp to your antenna. Then just plug in the power supply and you're broadcasting!

The IND1WATT24 is compatible with any wireless device that produces 100 milliwatts (+20dBm) or less of RF power and has an external antenna jack. This applies to most consumer-grade wireless routers and wireless NICs (Network Interface Cards)

This wireless amplifier is FCC compliant with low gain 802.11 antennas, licensed ham radio operators, military, and export applications. Please check local regulations prior to ordering.

Also, because the IND1WATT24 Wireless Indoor Amplifier combines a power injector and an amplifier, itis not rated for outdoor use, please take this into consideration when ordering, if you need an outdoor-rated amplifier, please refer to our amplifier page here

NOTE: The IND1WATT24, like most wireless amplifiers, can only accept a maximum input level of 100mw (+20dBM) without damage to the amplifier's internal circuitry. Please contact us before purchasing if you have any questions regarding this.


Back to WiFi Home

View all the WiFi Amplifiers

Note: Coaxial cables are not included. For cable information, please go here

High Gain Backfire Wireless Antenna

The Backfire WiFi Antenna has very good gain for such a small antenna. Performance on 2.4 GHz is excellent!! The 15 dB Backfire is the antenna we recommend for extended wireless coverage or building to building links.   More...

20 ft WiFi Antenna Cable

RadioLabs offers a full line of pre-made cables for your 802.11 installation. We have pre-made cables or you can have us custom make a cable for your specific application.   More...

o2Air-AC - High power 802.11AC router

The NEW o2Air-AC, High Power 802.11AC router from RadioLabs is a masterpiece in wireless networking technology. Say goodbye to laggy video and demanding network transfers with blazing fast 1170 MBPS wif network connectivity and the horsepower of 4 x 1-watt 2.4 and 5.8 GHz amplifiers. The future of networking is here.   More...

Coax Seal

Coax Seal is used to keep your coax connection on your external antenna weatherproof. Coax Seal is a "tape like" material which you simply wrap around the coax connector on all outside antenna connections.   More...

2.4 GHz 11.8 db Omni-Directional WiFi Antenna

This high gain vertical 2.4 GHz antenna can act as the central point to your WiFi, WLAN or 802.11 application. The Radiolabs 2.4 Omni antenna has a whopping 12dB gain. Ideally, you would want this antenna as the central point of your system and and use a directional antenna on the client side for maximum throughput.   More...

Model # IND1WATT24
1-Watt Indoor Wireless Amplifier
Operating Conditions
Temperature Range
Normal: -10°C ~ +50°C
Extreme: -30°C ~ +70°C
5% to 100% RH
Storage Temperature -40°C ~ +90°C
Supply Voltage AC 100V~240V
50/60Hz DC 12V/1A
Electrical Conditions
Access Method DS/TDD
Operating Frequency 2.4GHz ~ 2.5GHz
Spurious Emission 30MHz ~ 1 GHz : -36dBm(max.)
1GHz ~ 12.75 GHz : - 30dBm(max.)
Transmitter Specifications
Tx output power variation 25°C: 30dBm ±1dB(Pin=13dBm)
-30°C: 30dBm ±2dB(Pin=13dBm)
70°C: 30dBm ±2dB(Pin=13dBm)
Tx output power vs. Input
30dBm ±1dB(Pin=7~20dBm)
30dBm ±2dB(Pin=7~20dBm)
30dBm ±2dB(Pin=7~20dBm)
Tx ACPR ±11MHz -30°C ~ +70°C: 30dBc (max.)
TX on/off control time 30°C ~ +70°C: 5us (max.)
Receiver Specifications
Rx Gain -30°C ~ +70°C: 10dB(min.)
Rx Gain Flatness 25°C: ±1dB
-30°C: ±2dB
70°C: ±2dB
Rx Noise Figure -30°C ~ +70°C: 3.5dBm (max.)
Rx Third Intercept Point -30°C ~ +70°C: 30dBm (max.)
Rx Return Loss -30°C ~ +70°C: 14dB(min.)
Rx on/off control timing -30°C ~ +70°C: 2us (max.)
Current Consumption
Tx Current 1000mA (max.): -30°C ~ +70°C
Rx Current 130mA (max.): -30°C ~ +70°C
Package Contents 1. 1-W Booster Amplifier
2. AC Power Adapter
Item # IND1WATT24
Price: $229.95
Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
RadioLabs and are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -