RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
Wifi Range Extender

2.4 GHz Wireless Range Extender Amplifier
Extend the range of your wireless network with RadioLabs 800 mWatt Amplifier and impressive receive amplifier. This is the most innovative design in Wireless amplifiers and features a detachable antenna.

Antenna Details
RadioLabs Low Price:

In Stock
View Your Shopping Cart


  • Bi-directional amplifier for IEEE 802.11B, G and Super G
  • Automatic gain control to minimize the signal distortion on all access points
  • High Power transmit level, 800mW (or +27dBm)
  • Low noise amplifier with system noise figure 2.5dB
  • 110 volt - 6.5VDC power adapter for operation from wall current.
  • No Programming Required
  • Sturdy aluminum chassis with integrated heat-sink
  • Power, Receive and transmit diagnostic lights.

The easiest way to extend the range of your wireless network!

Click here for our new 800mw Wifi Range Booster Amplifier!

So, you want to extend the range of your wireless system, but want an easy solution huh? Just think of this as a rubberduck antenna on steroids!! This is the most impressive and easiest way to extend the range of your wireless router, access point or repeater. If your wireless connection is falling out in your home or you have disconnect problems, purchase this solution and it will never happen again.

This 800 mWatt amplifier works at B, G or Super G speeds and includes a transmit and receive amplifier with amazing specifications.

If you need an extension cable, please refer to our cable page. If you need a custom cable for your application,or have any questions, please contact us.

Note: These wireless amplifiers are FCC compliant with low gain 802.11 antennas, licensed ham radio operators, military, and export applications. Please check local regulations prior to ordering.


IMPORTANT NOTE: The Wifi Range Booster Amplifier is not compatible with our High Power Access Points, Wave Magnum High Power USB Adapter, WaveRv II Long Range Adapter or any wireless device that produces over 100 milliwatts (+20dBm) output power. Connecting the WRE800MW to any device over this power level will damage the amplifier's circuitry and void all warranties. Please contact us if you are unsure of your device's power output.


Back to WiFi Home

View all the WiFi Amplifiers

Mobile Wireless Antenna with Mag Mount

Mobile Wireless LAN is the future of wireless networking. The very nature of 802.11 excites people with its dynamic mobility, and our Mobile Wireless 7 dB Antenna is the tool that lets you maximize the potential of wireless technology. WiFi is great, but if you can't keep a connection with the wireless network, it gets very frustrating.   More...

SuperSeed - USB WiFi Adapter || High Power

New Product The Super Seed! -1 Watt - The easiest and most economical way to make any PC with a USB port wireless. Powered completely by your computer, the Seed is a completely self-sufficient Wi-Fi adapter, which, by itself, will pull in more signals than most other USB Wifi devices in it's price range. Use the Seed by itself, or connect our high gain antennas or amplifiers to pull in signals from farther away then you ever thought possible!   More...

High Gain Backfire Wireless Antenna

The Backfire WiFi Antenna has very good gain for such a small antenna. Performance on 2.4 GHz is excellent!! The 15 dB Backfire is the antenna we recommend for extended wireless coverage or building to building links.   More...

Model #WRE800MW
- Wireless Range Extender -
Amplifier Specifications
Frequency Band 2.4 ~ 2.5 GHz
802.11 specifications 802.11B, G and Super G compatible
Signal Type DSSS - Multimode
Receiver Specifications
RX Max. Input Power -10 dBm
RX Power Gain
20 dB
Transmitter Specifications
TX Input Power 0 ~ +20 dBm
TX Linear output Power 500 mW / +27 dBm max. @ 11g
800 mW / + 29dBm max @ 11b
TX/RX Switch Time < 1µsec
User Interface
Diagnosis LED

Power = Green
Transmit = Red
Receive = Yellow

Power Requirements
DC Supply Voltage 6.0V, 1A adapter included
Current Consumption 550 mA maximum during TX
Mechanical Specifications
RF Connector Type RP-SMA Male
Operating Temperature -0 ~ +50 °C
Item # WRE800MW
Price: $99.95
Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
RadioLabs and are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -