Directional, 2.4 and 5 GHz MiMo WiFi Antenna, with excellent gain, two antenna connectors and great band separation. This amazing antenna takes two cable input from a router, Access Point or Repeater, then adds excellent forward gain for 802.11AC bridging, connect and repeater mode, or simultaneously pushing both bands of WiFi through walls, buildings or creating fast and easy network bridging on both WiFi bands at one time. Our low price on this antenna makes it a n0-brainer for short range AC Speed bridges.
RadioLabs – WiFi Flat Panel antennas, are an extremely low profile, high gain wireless antenna, allowing very high gain in a very moderately sized array. Similar in comparison and gain to a Parabolic, The only reason why these antennas are physically possible, is because this antenna operates in the 2.4 GHz frequency range. The Flat Panel design, allows extremely high gain in an antenna that’s not only thin, but has excellent reception and transmission. A whopping 19 dB gain is achieved on both the transmit and the receive side and unlike a WiFi Parabolic Grid antenna,. Take for instance this 19 dB, high gain Panel. If this antenna was designed for the much lower frequency FM Radio broadcast band for example, the wavelength is so long, that this antenna would be approximately 36 foot tall and 36 ft wide.
The 19dB WiFi Panel antenna, is one of RadioLabs engineer’s favorite antennas for size, performance and huge forward gain, excellent characteristics and can be used with excellent success on the majority of WiFi Bridge, Client and even AP links.
The O2Breeze is the latest in our O2 line of high power 802.11 WiFi routers. Providing 1 Watt (1000 milliwatts!) of RF output power, this unit is the highest output router legally available. If you need a high power N-Speed router with lots of coverage, this is the perfect networking unit for you.
RadioLabs newly redesigned Super Seed USB Wifi Adapter is designed to be the best way to get long range wireless for your laptop with a simple USB connection. The NEW Super Seed is everything you need to give your PC long range wireless connectivity built into a small easy to use package and machined from a solid block of aluminum!
The O2Wind is the reliable, long range wifi workhorse of the RadioLabs product line.. At 1 Watt (1000 milliwatts!) this unit is the highest output router legally available. Used by NASA, in a high reliability, zero failure option application, the o2Wind performs both with speed, reliability and long range performance. If you need a high power router for lots of coverage, this is the unit for you. w/ NEW POE OUTPUT Capability!!
N Male Connector for RL or LMR 400 coax. These rugged connectors are crimp style, ultra low-loss design, incorporating a gold plated pin, crimp ring, and allow for wrench or finger tightening to any coax, or wifi / wireless radio. Perfect for all outdoor applications, which require N Male connection. Works on all RadioLabs WiFi Antennas.
WiFi Omni Directional Antenna – 15dB gain – RadioLabs powerful commercial series, thin-wall fiberglass omni antenna, radiates a signal in a 360 degree pattern, allowing the maximum signal transmitted directly out the side of the antenna, sending the signal the maximum distance possible. This incredible antenna, is durable, rugged and when people ask how strong are they, well, our’s went through 7 long hours of Hurricane Florence, bending over through powerful 100+ MPH winds and withstanding huge gusts that broke all nearby trees off, of pushed them over at the base. This antenna is as durable as they come!
Outdoor WiFi Access Point – 12dB Omni kit – Creating a high power outdoor Access Point can be a difficult task. You select the components you think will create a stable, high speed WiFi Access Point, join it to your network, and find out you have inadequate coverage, or don’t have the WiFi Speed, or WiFi devices can’t reach the outdoor WiFi access point. Creating a stable Wireless AP is a difficult task. Performance will vary radically depending on components you choose. Or, you create a high power access point, only to find out that the receiver on the device you selected is not sensitive enough to receive weak signals from low power devices. Well, with over 1-1/2 decades of WiFi experience with every wifi product known to man, RadioLabs is proud to release the only WiFi Access point you ever need for RV Parks, Marinas, Farms, ranches, large properties with acreage. Every single device is selected for a specific purpose and we present the best performance complete package for our customers. The RadioLabs o2Surf Outdoor Access Point System. The only public or private access point you need.
Power Over Ethernet, 24 Volt, POE. These high quality POE injectors, operate off of 110 or 220 VAC, and are the standard power devices for most WiFi or Wireless devices. These high quality, UL / CE Approved power injectors, allow you to instantly power most WiFi devices off, direct from CAT-5. Powers all RadioLabs, Ubiquiti, Engenius, and other manufacturer’s devices.
Fast, Simple, Reliable. RadioLabs’ NEW, ZipBridge, is a high performance, short hop 300 MBPS, MiMo, WiFi/Wireless bridge system, specifically designed to provide a powerful, self-tuning WiFi link to any building on your property, up to 1 mile or more. These easy short hop bridges, are the key to instant wireless / WiFi bridging, using one single internet router, to provide a direct link, inside of the same network to any location.
RP-SMA Connector for RL-LMR-400 and 100 style coax. These high quality, crimp style connectors are the highest quality available, made of solid metal, plated, with gold plated center conductor pin. These connectors are the same style we have used for over a decade, on thousands of customer bridges, omni antennas and almost any imaginable WiFi – Wireless installation.
RadioLabs high quality RP-SMA Male WiFi coaxial connectors, crimp style, for all RL and LMR-400 and 100 series cable. We have installed tens of thousands of these connectors since 2001. They are the most common WiFi connectors on the market, fitting most routers. Install onto any cable with proper crimping tool in seconds. Center solder to tip, or, crimp to tip instantly. We recommend soldering on tip, crimp to braid on outside. Available in single qty, 10 and 100 bulk pack.
RadioLabs’ new USB WiFi Directional Antenna, O2Connect is designed to be a fixed mount, long range wifi panel antenna with high speed B/G/N, 150 Mbps, USB module built in. RadioLabs’ new chipset gives 2x the power and twice the receive sensitivity for very long range connections and point to point bridging up to 5+ miles – Line of Sight.
The RadioLabs LAM ( Large Antenna Mount ) is a 24 inch pole, with heavy duty steel bracket, powder coated for long life. These adjustable poles can swivel or mount to any surface, and adjust to literally any position. Whether it’s rooftop mounting, wall mount or any imaginable mounting position, these sturdy, weatherproof poles can be installed in a snap for long life and easy deployment of your WiFi System.
WiFi Pigtail cables – The perfect solution for adapting any wireless card, access point, router or wireless network device to a universal coaxial cable. RadioLabs offers 12″ pigtails for connection to your wireless product. Wifi pigtails are a common way of adapting any wifi device or different cable diameter by adding flexibility to your wifi or wireless cables. AP, Antenna, etc The wifi pigtails are made with high quality coaxial cable (LMR-100 or RG-316 or Equiv) connectors, for simply adapting N Female or N Male to your wireless card, amplifier or injector.
Showing 17–32 of 41 results