The O2Surf, weatherproof WiFi Access point, bridge, client from RadioLabs!
802.11 B/G/N – 150MBPS Bridge, outdoor wifi Access Point, Repeater, Client – The only WiFi tool you need!
The Best High Power, low-cost outdoor wifi radio made.
The o2Surf, is a new member to the RadioLabs family of cutting edge wireless equipment. With robust features, the o2Surf is the all-in-one outdoor wifi device designed to solve many of the networking issues individuals and companies face today. This high power, Outdoor WiFi access point/client/bridge/repeater, has it’s own integrated N-Male antenna connector. The o2Surf radio, connects directly to any 2.4ghz antenna offered by RadioLabs. Simply select an Omni Directional WiFi Antenna, or a Directional Wifi Antenna from our online catalog, which we have universally matched our antenna connectors, so any N-Female cable or antenna will screw directly onto the 02Surf’s wifi connector. Furthermore, in the instances that a coax cable is necessary, users can deploy their equipment with the confidence that signal loss will be minimal. This means optimal speeds, increased stability, and extended coverage of their wireless networks.
The O2 Surf can be configured to operate in several modes:
Access Point Mode: The o2Surf, is designed to work as a high speed, high power outdoor wifi Access Point. It is suitable for RV Parks, Farms, Home internet, Marinas, Parks and Recreation, Zoos, Large Scale deployment of public wifi or anywhere you need to install access over a broad open area. The features in the o2Surf radio, are perfect for use where dozens of wifi enabled devices need to connect and pass traffic through the network at high speed. The receiver sensitivity is excellent, for receiving low power devices, and allow for distant connection to weak wireless devices. Our WDS + Access Point mode, allow for small to medium size point to point, or point to multipoint operation, where repeaters or dedicated clients can seamlessly and permanently connect to the o2Surf radio. The o2Surf can also act as a Wifi Router and Access point, and a simple incoming internet connection can plug in. The o2Surf can then be programmed to operate as a WAN gateway, and issue IP Addresses to all devices on the network.
Client Mode: in which the device receives its signal through its antenna port, exporting it to the Ethernet port
Access Point Mode, where your device creates its own powerful, secure wireless network by simply connecting to one of the LAN ports on your existing router.
Bridge Mode, in which two of the devices are used to form a seamless point to point link at a distance of several miles (using properly aimed directional antennas). The o2Surf can even be used as a router, with the proper configuration.
Client Router Mode: This is a brilliant mode, which allows the o2Surf to connect to ANY access point, on any local IP Address, such as public hotspot or gateway, xFinity Hotspot, Verizon Hotspot, or literally any network, and the o2Surf acts like a single computer connecting to the system. Then, in a brilliant pass-through mode, the o2Surf receives an incoming IP address from the public hotspot, then turns around and starts passing out it’s own privatized IP Addresses, acting like a simultaneous client and router. This amazing new Client / Router mode built into the o2Surf, is perfect for permanent connection to xFinity or similar hotspots, where you want to use one of our high power routers to connect all your devices, yet maintain a permanent gateway to the internet. RadioLabs offers full kits utilizing this mode, and have hundreds, if not thousands of customers connect to public hotspots using this amazing new mode. Client Router mode, can also be used to permanently connect to any wifi connection, then re-issue your own private, firewalled gateway, capturing the internet, then completely and securely privatizing your own internet. Call us if you have any questions about using this mode in any application.
Repeater Mode: is a special operation mode which allows the o2Surf to seamlessly receive and rebroadcast any o2Surf or RadioLabs outdoor Access Point product and rebroadcast it with another broadcast signal name (SSID) or with the same SSID. This all happens in a special mode called “WDS Repeater Mode” setting, and is quite seamless across our entire outdoor wireless product line.
Outdoor Wifi – In any WiFi Mode
With the flick of a software switch, you can configure the o2Surf to receive and transmit wifi from any remote building within range. This is the perfect wireless tool and can perform any wireless function! Maintain ultra fast speeds with the 802.11 B/G/N connection modes, with up to 150 MBPS wireless speed! It’s a full tool kit of wireless options to convert the O2Surf literally into a High Power Access Point, a Client to connect to far away access points, a repeater, to repeat any access point out there, or even set it up to put in a permanent connection to the mother in law’s building, your garage, out-building or leave it up to your imagination. These make excellent outdoor wifi access points
Running RadioLabs proprietary streamlined user interface, setup and integration is a breeze. Simply attach your RadioLabs antenna, power up the device and connect it to your computer, login and make the necessary changes, and your network will be up and running in no time. Due to the O2 Surf being powered via POE (Power-Over-Ethernet), you don’t even need to run a power supply to the bridge, just use the included power injector and your bridge has power and data transmitted over CAT-5 cabling! Plus, with its robust, weatherproof casing designed to withstand the harshest of outdoor elements, the O2 Surf is the perfect solution for almost any networking solution.
Just add an antenna and ethernet cable! This is the only outdoor wireless tool you need to perform virtually any wifi task. With a simple mode change, the O2Surf can be changed to a bridge, to link two buildings for internet for miles around, a repeater to light up any RV Park, Marina, Camp, or literally saturate any area in wifi. They can repeat, or “daisy chain” together, to form a network of almost unlimited size, while retaining low overhead and FAST speed.
The O2 Surf provides more than 800mW (+ 29dBm) of output power and delivers:
- Most sensitive chipset in it’s class. Output power is no longer critical because O2Surf uses one of the most sensitive receiver chipsets on the market!
- 150+Mbps real TCP/IP throughput traffic at 802.11 B, G or N speeds. Selectable via software interface.
- Weather-proof and powered via POE (Power Over Ethernet). Run power plus data up to 330 feet from it’s power source.
- Updated simple and intuitive user interface for effortless navigation. Easy configuration modes, make programming simple.
- Easy user manuals allow for step by step programming to easily setup your O2Surf to connect, repeat, or virtually any wireless function imaginable. No more looking for what device to buy, the O2Surf will literally do anything.
- Compatible with any 2.4 GHz wifi antenna
- Can be utilized in Point-to-Point (PTP) bridging or Point-to-MultiPoint applications. Made to seamlessly bridge two locations, almost like you dug a trench and ran cable.
Will perform virtually any wireless mode through firmware setup.
NOTE: This is not a Bullet. The WiFi Bullets we offer are available here:
The O2Surf is much more sensitive, easier setup and configuration, lower cost and ability to broadcast multiple SSIDs. There are many other differences, but the RadioLabs O2Surf is a superior product to the WiFi Bullets. (If you have an existing install using our Bullets, these will still communication with them, however, it is best if you already own our first generation and want seamless WDS, please purchase the Bullet)
- Coming soon … Instant bridges, Repeaters, Client kits and more.. If you would like to use this radio for any function, please call us. We will set up a customized kit for you on the phone! There’s nothing lower cost on the market that will perform so many wireless functions inside one device!