Powerful 5-6 Ghz Non-Line-of-Sight Wireless Bridge – 2.4 Ghz High Power AP

Break through Obstructions with The Most Powerful 5 GHz Wireless Bridge Dual Band with extra 2.4 GHz Embedded

The GS-6200, is a NEW, incredibly powerful, Line of Sight, or Non-Line of Sight – 5 – to – 6 GHz Wireless bridge System with additional embedded 2.4 Ghz, very high end wireless Radio, which can be used for any function, including AP/Client or WDS Bridge. With NDAA and TAA Compliance, as well as 889 compliance for Military applications, the GS-6200, gives you the power and versatility to perform literally any function in the WiFi/Wireless arena. Easily bridge up to 25 miles or more (reports exceeding 68 miles to one bridge platform, then another 111 miles for live streaming 6 of the 4K HD television network streams for the Baja 1000 Race, live) and also great Non Line of Sight performance through dense foliage over shorter distances, with remarkable wireless throughput rates of 867 Mbps on 5 GHz (Wireless speeds), and an additional, embedded output of 300 Mbps on the 2.4 Ghz Band.

The GS-6200, is excellent at penetrating medium range, up to 3500 ft of mild to moderate obstructions. Elevating higher into the trees, the GS-6200, has penetrated over 7-1/2 miles, “skimming” across the tops of trees, with jaw-dropping performance, which our IT Engineers minds boggled.
** However, under extreme circumstances, higher power models from RadioLabs are actually available.
Remarkable Non Line of Sight (NLOS) Wireless bridging, using phase steering, multi-polarization design, along with outstanding Line of sight performance, at 25 to 60 miles or more based on elevation and terrain.

1 – Extend Your Network Further with the 2.4 GHz Radio – Rebroadcast or Bridge NLOS 

The Extra Embedded 2.4 GHz radio on the GS-6200 acts as a bonus “Radio”, offering additional functionality beyond the powerful 5 GHz bridge. Here’s how you can leverage its potential:

• Unbelievable 1 Watt Transmitter and Receiver: The Embedded Atheros Wireless chipsets, and onboard, high power transmitter and unbelievable receive amplifiers, allow for 1000mw power output on both 2.4 and 5 to 6 Ghz bands. A Never-Before seen receiver noise floor of -104dbm, allows for performance we didn’t think was possible without liquid cooling in the past!
• Create a Separate Wi-Fi Network: Utilize the 2.4 GHz band to establish a dedicated Wi-Fi network for your devices like laptops, tablets, and smartphones. This expands your overall network coverage and eliminates dead zones.
• Bridge to Another Location: Extend your network even further by using the 2.4 GHz radio to wirelessly bridge to a remote location. This is ideal for connecting additional buildings or areas that are out of range of the 5 GHz signal.
• Dedicated Outdoor Wi-Fi: Set up a dedicated Wi-Fi zone specifically for outdoor security cameras or other devices requiring a strong signal.

Ever wonder how they got Video Coverage for huge open land masses like the Baja 1000?
like the The GS-6200, was an long range bridge system, that supplied Wireless traffic to cover the entire Baja 1000 Race, with 2 hops, for constant video coverage, over 2 hops.
Over vast territories, this amazing 5 ghz system bonded high speed, low-latency and the main thing, reliability.

2 – Unmatched Wireless Firmware Tools, Flexibility and Control

The possibilities are endless with the dual embedded radio functionality. You can even:

• Configure Multiple Access Points: Utilize both radios to create multiple access points, ensuring seamless Wi-Fi coverage across a large area.
• Advanced Network Management: Leverage the OpenWRT Luci firmware for granular control over both radios. This allows fine-tuning channels, analyzing real-time throughput, and even implementing advanced routing features.
• Penetrates what was considered impossible: Wireless Bridge, through substantial obstruction, or direct, line of sight. Used in industry and by homeowners, where no other bridge system can provide a reliable, dedicated high speed internet or network signal, for Radio and News network for Studio to Transmitter Links, miles away. For Transmitting popular Desert Races, providing live TV Coverage, with a record breaking 68 mile link, to a tower, to another bridge on a tower, linking 111 miles away!
• More Bridge Channels Available for Connecting: 5 Ghz band gives you the ability to bridge, even in densely congested Wireless traffic areas, like downtown, residential neighborhoods, or high use WiFi areas, or even rural areas. 5 GHz, gives you the power and numerous channels, to move your Wireless Bridge to an open fast Channel.
• FAST Wireless/Wifi Performance!: Data Connectivity up to 867 MBPS 2×4 MiMo on 5 GHz for bridging, and an amazing 300 MBPS, 2.4 GHz separate wireless chipset, for 2.4 Ghz local use. (Ethernet is slower than our Wireless, but provides enough performance for multiple homes, or corporate entities) 
• Use 2.4 GHz WiFi Access Point or Bridge: The Integrated External N Female antenna ports on top of this engineering marvel, provide long range WiFi, to Security cameras, general use WiFi around your property, Pool areas, instant 300mbps output for Gazebo or establishing outdoor WiFi to remote buildings, barns, detached garage, or other needs for WiFi output. The 2.4 embedded transmitter/receiver, use Powerful 1000mw for any mode of operation, even using the radio to bridge off, 10 miles or more using our 19db MiMo Line of sight, or NLOS Panel antennas on top, for rural bridging to cover entire ranches, or bridging impossible locations that never had network to them before! 
• Powerful 5 GHz Directional Panel: This high power multi-polarization bridge, designed for long range Internet Data, Video, RV Parks, Marinas, Campgrounds, Rest Stops, or anywhere the need to provide broadband drop, on 5 GHz, then WiFi output to users on 2.4 GHz.
• Multi-Hop Capability: Bridge Point A to point B, on 5GHz, then use 2.4 GHz band, to Wirelessly Bridge, to a remote location, B to C, by simply changing firmware.
• Robust, full OpenWRT Luci firmware: Allows unlimited capability to modify every aspect of  your Dual Band, Dual Radio Wireless Bridge / Access Point / WDS Bridge / Client radio, to perform more functions than can be listed.
• High power Chipset/Power Amplifiers, on both bands, combined with an incredibly sensitive receiver, gives you 1 Watt power output from both bands (Note: RadioLabs can only configure your bridge, to the Maximum Legal FCC Power output. The bridges give you world class performance, in countries with more power output, to allow more power and range than any wireless bridge in the industry.

Antenna ports on the top of the GS-6200, are used to add your choice of available omni directional, or directional (120 degree) MiMo antennas, as well as 2 cables of choice to connect the output of our 2nd embedded radio, to the output of the antenna. If you do not need WiFi output, simply leave the caps on our antenna connectors and keep the Powerful 2.4 GHz wifi transmitter disabled.

RadioLabs can configure the GS-6200 for operation inside of any network.

The GS-6200, can form complex point to multipoint networks, or bridging off of our 2.4 GHz embedded radio, to other systems.

As with ALL RadioLabs products, we do not use any Chinese chipsets, and are NDAA compliant. We are also 889 Compliant for US Military.

RadioLabs’ uses the most Advanced Qualcomm Atheros based wireless chipsets for both the 5 Ghz, as well as the 2.4 GHz bands. Each band, is controlled by it’s own separate, high end Atheros QCA or QXA chipset for complete control over both bands on the same IP Address. Each band, is fully independent and offers a full -30dbm (1000mw) output capable radio, with an unbelievable -104dbm noise floor.

No other competitor in the wireless industry can compete with the RadioLabs’ GS-6200 specifications at this price point.

Powerful OpenWrt Luci firmware, allows you to have complete and total control over the radios, with advanced features, like Channel Analysis graphs, real-time throughput analysis on each radio and each port, a full advanced routing if required, to even turn each GS-6200 into a full router, with WAN or LAN active, full firewall features, QOS (Quality Of Service) protocol for minimum and maximum bandwidth to each IP or MAC address in the network.

Ultra fast latency – Incredibly fast latency through the GS-6200, has been measured real time by RadioLabs’ engineers, after fine tuning the bridge system, for a measured latency of 1ms or less, over a distance of 2.7 miles with some nlos present at the time. Latency can be fine tuned to the meter, through advanced wireless settings. This latency setting, will auto-calculate within the bridge itself with our latest firmware.

Encryption and Security – The GS-6200, uses all of the latest encryption algorithms, including WEP (Not recommended) WPA- WPA2 – WPA3 Strong security, with all TKIP, CCMP (AES) and Auto encryption methods. Our strongest wireless security, allows users to be sure they have the most secure wireless encryption possible on both bands.