Description
Powerful 5 GHz Wireless / WiFi Bridge – Line of Sight, 5 Miles or More, or Non-Line-of-Sight Linking
The GS-5000Pro, is a NEW, incredibly powerful, 5 GHz Wireless bridge System Line of Sight, -OR- Non-Line of Sight (NLOS) – with a HUGE added bonus. A fully Programmable 2.4 Ghz “Radio”, which can be used for any function, including AP/Client or WDS Bridge. This, will be the last bridge you will need to buy for a decade or more, and includes many advanced features you will WANT to use either now, or in the future. The GS-5000Pro, gives you the power and versatility to perform Any Wireless/WiFi Bridge task you will ever want to perform. It is essentially 2 completely separate radios, all incorporated inside of one unit. Both a high power, long distnace bridge, but also an Access Point, to add cameras, or, a Client, to connect to an internet source. Easily bridge up to 5 miles or more (reports exceeding 12 miles already) and also great Non Line of Sight performance through dense foliage over shorter distances, with remarkable wireless throughput rates of 867 Mbps on 5 GHz, and 300 Mbps output on 2.4.
RadioLabs’ NLOS (Non Line of Sight) Wireless/WiFi Bridge technology works so well, that if we are contacted prior to purchasing, or our customers read limitations on our bridge technology, we have a 100% success rate, on all GS-3000, GS-500Pro (this bridge here), the GS-5800 (End of life and replaced) or our new, GS-6200Pro.
Non Line of Sight Wireless Bridge – 5GHz – Dual Band -with extra -2.4 GHz Access Point Included!
Wireless bridging in trees is tough. It takes special hardware and special wireless tricks to even get through minor obstructions with a traditional Wireless Bridge. RadioLabs, has been solely focused on getting data and an internet connection, through mild, medium and dense foliage, at substantial distances for 15 years, using circular polarization, Phase Steering and other techniques, allowing our customers to shoot a wireless signal through obstructions, any standard wireless bridge simply cannot!
Bridging on 900Mhz was long rumored, to be the only way to get through obstructions and nothing could be further from the truth. Even with RadioLabs’ original GS-5800, long range, NLOS (Non-Line of Sight) bridge system, not only penetrated through very dense trees, foliage and even rooftops, skimming thousands of feet or more, or direct, Line of Sight Distances up to 110 miles, and was vastly superior to any 900 MHz Bridge on the market. Now that 900 MHz is obsolete and wireless companies are unable to sell or manufacture anything in the 900 range, RadioLabs’ was far ahead of the competition, penetrating through obstructions.
The new GS-5000Pro, is our mid-tier bridge, which can penetrate through a substantial amount of trees and other out-buildings, at excellent range. No, it will not penetrate through a dense forest at 5 miles. There are no Wireless bridges in the industry, which can penetrate through a forest, but we have done what’s considered impossible, when No Direct Line of Sight is available and we’ve put our wireless NLOS technology against everyone else in the industry, with Excellent results on long range bridging through trees.
Do not use the online tools our competitors offer, they do not and cannot work. We can look at your proposed application and do a quick, HUMAN EDITED Wireless Calculation, using tools and our 22 + years of Microwave Wireless knowledge and tell you if your installation is possible. Note: Wireless bridges, will not penetrate through dirt. If there is a Hill in the way, it is not possible for a direct shot. The GS-5000Pro however, has 2, completely independant controllable radios embedded in the bridge. Our 5 GHz bridge which has the integreated NLOS panel antenna in the front, and our high performance, 1-watt 2.4 GHz radio, which exits through 2 x N Female antenna ports on the top.
Many customers, are currently putting in a wireless bridge, to link a remote house, building, business or specific area they need internet at, but then need to add WiFi cameras outside. So, to do this, traditionally you would need a wireless bridge, then a separate Outdoor WiFi Access Point kit for Cameras for one, or BOTH sides of the bridge. Well, now, it’s all incorporated into one unit, allowing you to do both of these functions at once. They’re perfect for homeowners, who want the best wireless bridge in the industry, plus want security cameras around homes or locations on both sides of the link. It’s like buying 2 complete, separate kits at once, for both bridging point to point using the 5 GHz band, and a separate, completely controllable 2.4 GHz access point, for general purpose WiFi, or, even bridging to a diffrerent location.
The GS-5000Pro, is good for penetrating medium range, up to 1700 ft of mild to moderate obstructions. However, under extreme circumstances, higher power models from RadioLabs are available.
Remarkable Non Line of Sight (NLOS) Wireless bridging, using phase steering, multi-polarization design, along with outstanding Line of sight performance, at 5 miles or more.
The GS-5000Pro includes 2 completely programmable, wireless radios, which allow you to do the following:
- Wireless Bridge, through substantial obstruction, or direct, line of sight.
- 5 Ghz band, gives you ability to bridge, even in densely congested WiFi areas, like downtown, residential neighborhoods, or high use WiFi areas, or even rural. 5 GHz, gives you the power and numerous channels, to move your Wireless Bridge to an open fast Channel.
- WiFi / Wireless connectivity up to 867 MBPS 2×4 MiMo on 5 GHz for bridging, and an amazing 300 MBPS, 2.4 GHz separate wireless chipset, for 2.4 Ghz local use.
- Use 2.4 GHz WiFi out on external antenna ports, to provide long range WiFi, to WiFi Security cameras, general use WiFi around your property, provide WiFi to a Pool, Gazebo or establishing outdoor WiFi to remote buildings, barns, detached garage, or other needs for WiFi output.
- Perfect bridge, designed for RV Parks, Marinas, Campgrounds, Rest Stops, or anywhere the need to provide broadband drop, on 5 GHz, then WiFi output to users on 2.4 GHz.
- Bridge Point A to point B, on 5GHz, then use 2.4 GHz band, to Wirelessly Bridge, to a remote location, B to C, by simply changing firmware.
- Robust, full OpenWRT Luci firmware, gives you unlimited capability, to modify every aspect of your Dual Band, Dual Radio Wireless Bridge / Access Point / WDS Bridge / Client radio, to perform more functions than can be listed.
- High power Chipset/Power Amplifiers, on both bands, combined with an incredibly sensitive receiver, gives you 1 Watt power output from both bands (Note: RadioLabs can only configure your bridge, to the Maximum Legal FCC Power output. The bridges, give you world class performance, in countries with more power output, to allow more power and range than any wireless bridge in the industry.
Or, turn both of the extra radios into outdoor High Performance Access Points, or even bridge off to another location, 5 Miles or more. There’s an endless combination of possibilities with RadioLabs added High Performance 2.4 GHz radio embedded into the bridge. It’s literally like having 2 bridges, all in one compact, easy to install package! Full, custom OPENWRT Luci advanced wireless control interface, allows for the ultimate in receiver/transmitter control. Embedded wireless bridge tools gives you the ultimate control for fast, powerful, penetration through dense foliage, or over treetops, or even small structures, for non-near line of sight reliable bridging.
Reviews
There are no reviews yet.