Wireless Bridge Kit || Complete WiFi System


New, High Performance, Long Range Bridge Kit, in a box, completely pre-configured, programmed by a technician here at RadioLabs. This powerful new  WiFi Bridge in a Box system from RadioLabs, includes everything you need, to extend your WiFi signal, from one location, to another, either sharing Internet with another office building, another house, or combining 2 of your own buildings where normal WiFi coverage just can’t connect. Provide broadband or networking, between any 2 locations, up to 5 miles away! We have sold thousands of these WiFi kits over the years and they are the most reliable bridge system on the market, hands down.


Wireless Point to Point Wireless Link – WiFi bridge kit

Wifi Bridge System - Wireless Configured

The Best COMPLETE WiFi bridge solution on the market
Finally! A complete bridge kit, set up.. Mount the hardware, plug in the power, and you’re set! No more programming nightmares, we do it all for you!* RadioLabs Bridge in a box, high power, long range wireless bridge system. Create a very fast, 150 MBPS wireless bridge link, instantly.

RadioLabs, the long time leader in personalized wireless networking, is proud to offer our customers, a completely programmed bridge kit, with nothing else to do except mount the hardware and connect to your router or AP. This kit, will combine 2 network systems, or, can act as the center hub for an entire wireless networking link, to provide your own independent cable company or DSL drop, to your home, up to 5 miles guaranteed in a rural situation.

Note: RadioLabs recognizes that networking bandwidth requirements are ever increasing, and that older 802.11G  WiFi Network bridging speeds don’t cut it. With this combination kit of high power equipment, you can easily obtain wireless speeds of up to 150Mbps Wireless bridging for point to point links, up to and exceeding 5 miles. (line of sight, interference and obstructions will limit bridge distances)

Long Range High Speed Wifi Bridging System

A full featured, low cost, point to point wireless bridge kit, containing everything needed to link two locations with wireless speeds up to 150 megabits/second. When reliability, range and cost are your #1 goal. We specialize in bridges. Our company lives off of one. Our 2.4 Ghz, O2Surf bridge, is the best performing wireless bridge system on the market, guaranteed.

RadioLabs has been selling this bridge kit, or, a different version of this bridge kit, for over a year, and it’s been one of the most successful products in our inventory. The o2Surf Wireless multi-purpose WiFi radios are ultra stable, very sensitive, programmable system, capable of performing any Wireless Mode, including Access Point, Router, Client, WDS Bridge or Repeater mode and they have been flawless!

Utilizing our new O2 Surf radios, this wireless bridge is the ultimate WiFi solution for when internet is required in remote locations. Coupled with a 15db Backfire WiFi Antenna, the O2 Surf High Speed Wifi Bridging System provides wireless speed/wireless/wifi-antennas/directional-wifi-antennas/backfire-2-4-ghz-wifi-antenna/s of up to 150Mbps, which allows for seamless streaming of HD video, Skype video calls or other VOIP traffic, and blazing fast downloads.

What’s Included?
Wifi bridge Kit - Wireless Equipment layout
Click here to view – WiFi Bridge kit layout

Outdoor Wireless Bridge Radios – High Performance WiFi

RadioLabs oSurf Multi-mode WiFi bridge radios, performs all of the magic in many of our wireless applications. This compact, weatherproof, multi-functional unit is capable of operating as a transparent wireless bridge, an AP, client, or repeater. Powered by a POE (Power-Over-Ethernet), you don’t even need to run a power supply to the bridge, just use the included power injector and your bridge has power and data transmitted over CAT-5 cabling. Moreover, due to the O2 Surf being able to connect directly to the Backfire Antennas, consumers can rest assured that their system will operate with minimal (if any) signal loss and degradation.
Setup is accomplished through a web interface using a standard web browser, similar to the set up of your typical wireless router. Integrating this bridge system into an existing network is extremely simple, with ease of access and remote management capabilities.

WiFi Bridge Kit – With Long Range Wireless Bridge Radios

The O2 Surf’s 600mW transmit power combined with the Backfire WiFi Antenna’s 15dB of transmit gain allows line-of-sight links of multiple miles at substantially increased bandwidth capacity. The POE capabilities of the O2Surf allow flexibility in placement of the bridge devices. Supporting Cat-5 cable lengths up to 150 feet, the individual radio/antenna combinations can be easily located where the clearest line of sight between the two points is possible.
This compact bridging system can be used to extend an existing network to a remote location, share an internet connection, and with the addition of a wireless router or access point (such as the One Watt O2 Breeze 802.11 b/g/n Wireless Router), a separate wireless network can be created at the remote end of the link. The versatility of the O2 Surf High Speed Bridging System provides a wide range of uses and can provide high speed connectivity in a multitude of applications.

WiFi Bridge Configuration:

The configuration on the O2Surf Bridge in a box kit, is to:, and The default gateway is set to, because we cannot predict the gateway of your router’s IP. This is a very easy setting, and generally, the issue automatically resolves itself. In the rare event this setting doesn’t automatically adjust itself, a quick trip to our remote support server will fix this fast, while you sit back and enjoy watching our techs do the work.

If you would like us to configure this to a completely different network, please contact us for more information.

Programming on the O2Surf, high power bridge kit, is to our standard manual. It requires a lot of technical time, so please give us 24 – 48 hours on custom bridge configurations.

*IMPORTANT: If you want to change the base IP address on the bridge kit, please call one of our technicians during or after placing the order (within 6 hours of placing it) and we can custom configure it. If there is additional programming for custom IPs or VLAN gateway, there could be an additional charge, so please check with us first)
We guarantee it’s connected to your network, or you can log in to our remote tech support server and we will finish the bridge for you!

Additional information

Weight 7 lbs
Dimensions 12 × 12 × 10 in
Cable Length

25ft., 50ft.


– High Power Wireless Bridge System-
-Point to point WiFi Link –
Bridge in a Box Specifications
Bus Type CAT-5 – 10/100 Standard network (Gigabyte compatible)
Maximum CAT-5 cable length Up to 100 meters (330 feet) of CAT-5 cable may be used with RadioLabs 24v POE Injectors
Wireless Standard 802.11B, 802.11G – 802.11N – 150MBPS connection speeds. Complies with all 802.11x protocol
Operating Frequency 2400 to 2484 MHz (Ch 1-11 US)
International Version Available by software settings
Data Rate

802.11b: 11Mbps/5.5Mbps/2Mbps/1Mb
ps (with automatic adjust)
802.11g: Up to 108Mbps/54Mbps/48Mbps/36Mb/
24Mbps/28Mbps/9Mbps/6Mbps(with automatic adjust)
802.11N: Up to 150MBPS data rate. Backwards compatible with B and G technology for bridge or repeater standards

Modulation 802.11b: DSSS (Direct Sequence
Spread Spectrum)
802.11g: OFDM (64-QAM/16-QAM/QPSK/BPSK)
802.11n: Standard, 300mpbs compatible.
Operating Power 110VAC Direct AC Power (12v POE option available
Average Current .8 amp @ 24v POE input
Peak Current .6A 24v POE input
Transmit Power (ERP)

802.11b: 800mW (29dBm)
802.11g: 500mW (27dBm)
more power output available for export versions.
* Total EIRP Limits, at maximum FCC limits.

Receive Sensitivity 802.11b: -98dBm (typical) at 11Mbps
-91dBm (typical) at 6Mbps
802.11g: -76dBm (typical) at 54Mbps
-96dBm (typical) at 1Mbps
802.11n: (typical) at 150MBPS -92dBm
(not including antenna gain)
Working Range Outdoor:
@11Mbps, 5820 ’ (5Miles) @
1Mbps150 MBPS link up to 5 miles with packet adjustment and direct line of sight.
Ranges up to 15 miles or farther have been reported from our customers, however, specs guaranteed at up to 5 miles line of sight, rural locations. Urban transmission and receive distances will vary depending on terrain, obstructions and interference.
Security All Encryption methods

WEP, WPA, WPA2, WPA2-PSK, WPA-Enterprise with Radius authentication.

Antenna RadioLabs reliable, 15dB backfire antenna, allowing for vertical or horizontal adjustment with polarization switching, 22dB polarization differences.
Antenna Vertical Beamwidth 25 degrees
Antenna Horizontal Beamwidth 25 Degrees
Operating Temperature -20 deg C to 45 deg C
Storage Temperature -30 deg C to 70 deg C
Humidity 10-95%, Non-Condensing
Dimensions 10.5×10.5×5 for backfire. See dimensions of all items separately.
Color White UV – ABS Radome – UV Resistant
Warranty 1 Year Manufacturer warranty

End user is responsible for FCC limitations of power output and antenna radiation if external antenna is used. For more information please see our Wireless Range calculator


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Outdoor WiFi High Power Access Point – Client

Outdoor WiFi High Power Access Point – Client


The NEW RadioLabs O2Surf, and an antenna, are the only wireless tools you will ever need. Quite simply stated, this is the most versatile, general purpose WiFi device ever invented. Virtually any wireless function can be performed with this WiFi Access point, Repeater, Client Bridge radio. We have used these for bridging, RV parks, Marinas, or just extending wifi to a shop.

802.11AC High Power WiFi Router – 1 Watt


The New, Revolutionary o2Air-AC, 802.11AC long range, high power router, is a highly advanced network gateway router, that is the centerpiece of your network. With long range and blazing fast networking speeds, the O2Air makes network lag and streaming high resolution video delay a thing of the past.

Backfire 2.4 GHz WiFi Antenna


BackFire Wifi Antenna- The backfire antenna has very good gain for such a small antenna. Performance on 2.4 GHz is excellent!! The 2.4 backfire is the antenna we recommend for extended wireless coverage or building to building links.


Start typing and press Enter to search