N Male Connector – WiFi – RL or LMR-400 Cable
RadioLabs offers the highest quality N Male WiFi Coax Connector for LMR 400 or RL-400 coaxial type cable. These N Male connectors are the standard, crimp type connector, which will not fall off your coax. These are the most desired connectors available and are made of corrosive resistant materials.
These connectors fit all 400 Style cable from RadioLabs. These ultra-low loss wifi / wireless coax connectors, are threaded N-Male and include the crimp ring, center pin, and outside crimp barrel “Ring”. The center pin is soldered on to secure connectivity between the connector and the cable and is the perfect connector for multiple objectives. The pins can be crimped onto the center conductor of RL-400, or LMR-400 style cable, but copper can corrode over time, so it’s best to securely solder the gold plated pin, onto the center conductor of the coax.
N-Male connectors, are the most common type used for WiFi / Wireless coax, and are considered a standard for all outside applications. With excellent low-loss characteristics in outdoor wireless up to 6 GHz, these weather-proof N-Male Connectors are common for direct connection to all RadioLabs WiFi Antennas.
These N Male style connectors will adapt all 400 type coax cable, to all outdoor wifi antennas we sell.
NOTE: You cannot install these connectors, without the proper tools. You will need a soldering iron, as well as a 400 cable style crimp tool. You will also need a knife or stripping tool for the coax, a pair of cutters or “Snips” Trying to use other methods for crimping the ring, will end up with a very loose connector, which will fall off. RadioLabs recommends using our crimp tool, available separately. Please contact us for information regarding our crimp and installation tools.
Click here to view all RadioLabs Wifi antenna coax connectors
LMR 400 N Male Coax Plug Connector
- Crimp Style
- Threaded Inside
- Raised Solid Pin
- 17.8mm Outer ring diameter
- 7.9mm Inner ring diameter
- Gold Plated Pin