RP-SMA Female – WiFi Coax Connector | 400

$4.25

RP-SMA Connector for RL-LMR-400 style coax. These high quality, crimp style connectors are the highest quality available, made of solid metal, plated, with gold plated center conductor pin. These connectors are the same style we have used for over a decade, on thousands of customer bridges, omni antennas and almost any imaginable WiFi – Wireless installation.

SKU: RPSMAF400 Category:

Description

RP-SMA – Connector for RL-LMR-400 Coax – Crimp on

RP-SMA type WiFi Coax Connector

Our high quality RP-SMA wifi connectors come with the connector base, crimp ring and pin

RadioLabs RP-SMA Female type coaxial connectors for WiFi – Wireless cables, are high quality solid metal connectors. These crimp style WiFi coaxial connectors are the same connectors used on all RadioLabs Cable products, but also the same quality connectors used by professional installers of all WiFi Systems.

The connectors are plated, solid brass outer jacket, plated for long life, with a gold-plated center pin. The pin is the solder on type, or crimp if necessary, but crimping center pin is not recommended for long term use. These connectors come in a package, with all 3 parts shown included. On request, we will also include a small piece of heat shrink for around the base of the connector.

RadioLabs installs thousands of these connectors every year and we ensure you are getting the highest quality, most rugged connector possible.

High quality RP-SMA WiFi Connectors – Crimp type

All connectors are not alike. Many brands we have ordered were not sufficient quality to install, or sell to our customers. If the metal is cast molded, made of tin, does not have clean threads or if anything is not 100% top quality, we will never sell them to a single customer and would never dream of installing them on our cables. One bad connector can destroy an installation and waste dozens of hours trying to sort and troubleshoot the problem. As installers in the field, we know the hardships of bad equipment, so we ensure every connector, cable or product we sell is absolutely reliable.

assembled view of RP-SMA Female type WiFi coaxial connector

These RP – SMA connectors, are correct physical style, made of plated solid metal and gold plated pin.

Connectors are sold individually or available in bulk package of 10 or 100 pieces, or even available in 1000 lot mega packs.

Click here to view all RadioLabs Wifi antenna coax connectors

RP-SMA – Crimp style connector features:

 

LMR 100/400 RP-SMA Female Coax Jack Connector

 

  • Crimp Style
  • Threaded Outside
  • Raised Solid Pin
  • 6.2mm Outer Diameter
  • 4.5mm Inner Diameter
  • Gold Plated Pin

Additional information

Weight .1 lbs
Dimensions .70 × .50 × 1.2 in

Specifications

Model # RPSMAF400
RPSMA Female Connector
Electrical
Impedance 50 Ohms
Frequency Range DC ~ 11 GHz
Voltage Rating 1500 Volts Peak
Dielectic Withstanding Voltage 2500 Volts RMS
Insertion Loss .20 dB Max.
Mechanical
Mating 5/8-24 UNEF Threading Coupling
Mating Torque 15 inch pounds (170 N.cm) Max.
Cable Attachment Hex Braid Crimp
Center Conductor Cable Attachment Crimp or Solder
Cable Retention 60 lbs. Pull
Material
Body Nickel Plated Brass
Contact Gold Plated Brass
Insulator TFE
Ferrule Nickel Plated Brass
Environmental
Temperature Range -55C(-67F) to +85C(+185F)
Temperature Cycling MIL-Std. 202 Method 102
Weatherproof Yes
Moisture Resistance MIL-Std. 202 Method 106
Corrosion MIL-Std. 202 Method 101
Vibration MIL-Std. 202 Method 204
Altitude MIL-Std. 202 Method 105
RoHS Compliant Yes

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

N Male Connector – Wifi – Wireless cable

$4.25

N Male Connector for RL or LMR 400 coax. These rugged connectors are crimp style, ultra low-loss design, incorporating a gold plated pin, crimp ring, and allow for wrench or finger tightening to any coax, or wifi / wireless radio. Perfect for all outdoor applications, which require N Male connection. Works on all RadioLabs WiFi Antennas.

Wireless – WiFi Coax Cable – RL-LMR-400 Low Loss

$74.95$534.95

WiFi – Wireless – RL-LMR-400 series cables, RadioLabs ultra low-loss cable is a very high quality, low loss coaxial cable for all RF Applications, but specifically designed for the best possible specifications you can achieve in the 2.4 and 5.8 Ghz wireless band. RadioLabs unique RL-LMR-400 has lower loss than competitor’s cable, because it was designed using specialized materials, and center conductor / RF Foil and dense, yet flexible 100 percent shielding. Of all wide range cables available on the market, RadioLabs RL-400 and LMR-400 coax is the lowest loss available before switching to small diameter hard line.

WiFi Pigtail Coax Cables – Wireless Pigtails

$16.95 $14.95

WiFi Pigtail cables – The perfect solution for adapting any wireless card, access point, router or wireless network device to a universal coaxial cable. RadioLabs offers 12″ pigtails for connection to your wireless product. Wifi pigtails are a common way of adapting any wifi device or different cable diameter by adding flexibility to your wifi or wireless cables. AP, Antenna, etc The wifi pigtails are made with high quality coaxial cable (LMR-100 or RG-316 or Equiv) connectors, for simply adapting N Female or N Male to your wireless card, amplifier or injector.

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt
1

Start typing and press Enter to search